ZF and Levant Partner to Develop Regenerative Suspension

Regenerative brakes are increasingly becoming a popular option on new cars as a way to save energy, and soon that technology could be joined by another engineering breakthrough: a regenerative suspension.

We have reported on Regenerative shock absorber developments including Linear tubular electric motors Here, Here and Here and hydraulic actuator based systems Here and Here.

This technology is being developed by ZF and Levant Power, in hopes of producing a suspension system that combines “the vast gains of active suspension with modest power consumption, minimal complexity and affordable cost,” the companies announced in a release. Essentially, the alliance hopes to build the world’s first fully active and regenerative suspension for automobiles, and make it affordable enough for volume production.

Forming the basis of the technology is an innovative, functional unit that is fitted to the outside of a ZF damper. In the compact unit is its own control unit, an electric motor and an electrohydraulic gear pump. That gear pump is in charge of regulating the oil flow to the damper, allowing it to adapt optimally and automatically to the driving conditions. In addition, the system is even capable of actively raising each individual wheel on the vehicle.

The innovative valve system automatically uses the swaying motion of the damper piston in order to recover energy. The system then guides the oil in the damper, driving the electric pump motor, essentially allowing it to function like a generator. The generated kinetic energy is then turned into electricity which is fed into the vehicle’s power supply.

“We look forward to working closely together with Levant Power. The objective is to develop the world’s first fully active and regenerative suspension, make it ready for volume production and introduce it to the market. Thus, we are promoting efficient innovations that are tailored to meet global requirements,” said Rolf Heinz Rüger, in charge of the Suspension Technology business unit of ZF’s Car Chassis Technology division.

Graphene-Based Supercapacitors Improve Energy Density by 12x

Monash University (Australia) researchers have brought next generation energy storage closer with an engineering first - a graphene-based device that is compact, yet lasts as long as a conventional battery.

Published today in Science, a research team led by Professor Dan Li of the Department of Materials Engineering has developed a completely new strategy to engineer graphene-based supercapacitors (SC), making them viable for widespread use in renewable energy storage, portable electronics and electric vehicles.

SCs are generally made of highly porous carbon impregnated with a liquid electrolyte to transport the electrical charge. Known for their almost indefinite lifespan and the ability to re-charge in seconds, the drawback of existing SCs is their low energy-storage-to-volume ratio - known as energy density. Low energy density of five to eight Watt-hours per litre, means SCs are unfeasibly large or must be re-charged frequently.

Professor Li's team has created an SC with energy density of 60 Watt-hours per litre - comparable to lead-acid batteries and around 12 times higher than commercially available SCs.

"It has long been a challenge to make SCs smaller, lighter and compact to meet the increasingly demanding needs of many commercial uses," Professor Li said.

Graphene, which is formed when graphite is broken down into layers one atom thick, is very strong, chemically stable and an excellent conductor of electricity.

To make their uniquely compact electrode, Professor Li's team exploited an adaptive graphene gel film they had developed previously. They used liquid electrolytes - generally the conductor in traditional SCs - to control the spacing between graphene sheets on the sub-nanometre scale. In this way the liquid electrolyte played a dual role: maintaining the minute space between the graphene sheets and conducting electricity.

Unlike in traditional 'hard' porous carbon, where space is wasted with unnecessarily large 'pores', density is maximised without compromising porosity in Professor Li's electrode.

To create their material, the research team used a method similar to that used in traditional paper making, meaning the process could be easily and cost-effectively scaled up for industrial use.

"We have created a macroscopic graphene material that is a step beyond what has been achieved previously. It is almost at the stage of moving from the lab to commercial development," Professor Li said.

Graphene-Based Supercapacitors Improve Energy Density by 12x

Monash University (Australia) researchers have brought next generation energy storage closer with an engineering first - a graphene-based device that is compact, yet lasts as long as a conventional battery.

Published today in Science, a research team led by Professor Dan Li of the Department of Materials Engineering has developed a completely new strategy to engineer graphene-based supercapacitors (SC), making them viable for widespread use in renewable energy storage, portable electronics and electric vehicles.

SCs are generally made of highly porous carbon impregnated with a liquid electrolyte to transport the electrical charge. Known for their almost indefinite lifespan and the ability to re-charge in seconds, the drawback of existing SCs is their low energy-storage-to-volume ratio - known as energy density. Low energy density of five to eight Watt-hours per litre, means SCs are unfeasibly large or must be re-charged frequently.

Professor Li's team has created an SC with energy density of 60 Watt-hours per litre - comparable to lead-acid batteries and around 12 times higher than commercially available SCs.

"It has long been a challenge to make SCs smaller, lighter and compact to meet the increasingly demanding needs of many commercial uses," Professor Li said.

Graphene, which is formed when graphite is broken down into layers one atom thick, is very strong, chemically stable and an excellent conductor of electricity.

To make their uniquely compact electrode, Professor Li's team exploited an adaptive graphene gel film they had developed previously. They used liquid electrolytes - generally the conductor in traditional SCs - to control the spacing between graphene sheets on the sub-nanometre scale. In this way the liquid electrolyte played a dual role: maintaining the minute space between the graphene sheets and conducting electricity.

Unlike in traditional 'hard' porous carbon, where space is wasted with unnecessarily large 'pores', density is maximised without compromising porosity in Professor Li's electrode.

To create their material, the research team used a method similar to that used in traditional paper making, meaning the process could be easily and cost-effectively scaled up for industrial use.

"We have created a macroscopic graphene material that is a step beyond what has been achieved previously. It is almost at the stage of moving from the lab to commercial development," Professor Li said.

2014 Formula One exhaust energy recovery system explained

In an effort to reduce fuel consumption in Formula One by up to 35% the FIA have introduced wholesale changes to the technical regulations to significantly increased energy harvesting for the 2014 season.

In addition to doubling to power of the Kinetic Energy Recovery System (KERS), first introduced in 2009, from 60 kw to 120 kw and increasing kinetic energy storage by five times from 0.4 MJ/lap to Max 2MJ/lap, a new method of heat-based Energy Recovery System has been introduced.

The regulations refer to the two devices as the ‘Motor Generator Unit – Kinetic’ (MGU-K) and ‘Motor Generator Unit – Heat’ (MGU-H). The latter uses heat energy from the turbo to generate electrical energy.

The MGU-H unit captures waste heat as it is dispelled from the exhaust turbocharger via an electric generator attached to the turbocharger shaft. This waste heat energy is stored as an electrical charge adding an additional 2MJ/lap to KERS resulting in 10x - 4MJ compared to 400 kJ - as much electric power boost per lap compared to 2013 KERS.

2014 V6 Engine Q & A with MERCEDES AMG PETRONAS

What can you tell us about the 2014 engine?

First of all, let’s mention the rules rather than the engine. For 2014, the rules specify a maximum race fuel allowance of 100 kg – compared to a typical race fuel load of around 150 kg today, although that’s not fixed by the rules.

That means we have one third less fuel to complete the same race distance with – and we want to do it at the same speed. So we need a powertrain that’s 30% more energy efficient.

And that’s where the new engine comes in?

Well, it’s not really just an engine any more. Without getting too technical, Article 1.22 of the Technical Regulations now refers to what’s called a ‘Power Unit’. This comprises an ICE (Internal Combustion Engine), an ERS (Energy Recovery System) and all the ancillaries needed to make them work.

But why a Power Unit? Well, today’s V8 essentially features a “bolt-on” KERS Hybrid system that was added during the engine’s life. The 2014 Power Unit has been designed with integrated hybrid systems from the very beginning.

Interesting. F1 loves jargon, so ICE and ERS sound just perfect. What do they mean?

The ICE is the traditional engine in the Power Unit package. 1.6 litre capacity, turbocharged, and with direct fuel injection at a pressure of up to 100 bar. Where the current engines rev to 18,000 rpm, the ICE is limited to 15,000 rpm from 2014.

As for ERS, it’s like KERS on steroids: not only can we still harvest energy from and deploy energy to the rear axle, we can now do the same from the turbocharger; the kinetic machine is called MGUK (Motor Generator Unit Kinetic) and the machine on the turbo an MGUH (‘h’ for heat).

In total, we are allowed to harvest and deploy energy at twice the power to the rear axle – so 161 hp compared to 80.5 hp today. And we are allowed to deploy ten times as much energy – 4MJ compared to 400 kJ. Simply put, that means a bigger power boost for a higher percentage of the lap.

And that’s what helps improve the efficiency?

Exactly. Part of the efficiency gain comes from the ICE, which runs at lower speeds with fewer moving parts than the V8 and the benefit of turbocharging; but the other part is to be found in the ERS.

Today, the fuel energy we combust in the engine then has one possible energy journey to improve system efficiency, via the KERS system.

In 2014, there will be up to seven possible energy journeys to keep energy within the vehicle rather than wasting it through the exhausts and brakes.

Sound pretty impressive. Will it be exciting for the fans?

We believe so. The target is to achieve the same power output of around 750 hp but to do so using around 30% less fuel.

In terms of sound, the engine note is not as loud as the current V8 because of two factors: the lower engine speed and the fact that the turbocharger sits in the exhaust flow, recovering energy from it that would otherwise be lost as heat and sound.

But because of the mechanical balance of a V6 engine, it also sounds sweeter. And we’re confident that fans will find it pretty exciting when they hear it at the track.

What impact will it have on the racing?

First of all, the engine is going to produce a lot more torque than the current V8 and over a wider power band.

That means the car is going to be grip limited on corner exit, in technical terms; in layman’s terms, they’re going to be a handful for the drivers.

The next point is that it will reward the most intelligent drivers - the fastest way to finish a race will not always be straightforward and the cleverest drivers will probably adapt fastest to the new challenges.

So will we see F1 turned into an economy run – or cars running out of fuel in the latter stages?

Unlikely. Managing fuel consumption is already a critical part of F1 and it will remain so in 2014; for example, did you know that our V8 can complete a race distance today using 11.6% less fuel than it did in 2006?

Today, teams are very good at monitoring fuel consumption: we track each injection of fuel into each cylinder so we know exactly how much fuel is being used. And there are over five million injections in an average race!

Ultimately, the smartest driver in the quickest car will be successful in 2014, which remains true to the fundamental challenge of Formula One. What we’re really doing is putting the ‘motor’ back into ‘motorsport’.

New 311mph Maglev Train in Japan passes initial tests

Engineers with Central Japan Railway Co. have put their newest maglev L0 train through initial testing and report the new high-speed train is on course for commercial deployment by 2027. The train...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Toyota Hybrid Racing – Supercapacitor System Explained

The 90th Le Mans 24 Hours is approaching fast, with the test day already this Sunday, so we think it is a good time to explain a little more graphically about the TOYOTA HYBRID System – Racing...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]