Molten-air battery offers up to 45x higher storage capacity than Li-ion

Researchers at George Washington University have demonstrated a new class of high-energy battery, called a "molten-air battery," that has one of the highest storage capacities of any battery type to date. Unlike some other high-energy batteries, the molten-air battery has the advantage of being rechargeable.

Although the molten electrolyte currently requires high-temperature operation, the battery is so new that the researchers hope that experimenting with different molten compositions and other characteristics will make molten-air batteries strong competitors in electric vehicles and for storing energy for the electric grid.

This ability to store multiple electrons in a single molecule is one of the biggest advantages of the molten-air battery. By their nature, multiple-electron-per-molecule batteries usually have higher storage capacities compared to single-electron-per-molecule batteries, such as Li-ion batteries. The battery with the highest energy capacity to date, the vanadium boride (VB2)-air battery, can store 11 electrons per molecule. However, the VB2-air battery and many other high-capacity batteries have a serious drawback: they are not rechargeable.

The researchers experimented with using iron, carbon, and VB2 as the molten electrolyte, demonstrating very high capacities of 10,000, 19,000, and 27,000 Wh/l, respectively. The capacities are influenced by the number of electrons that each type of molecule can store: 3 electrons for iron, 4 electrons for carbon, and 11 electrons for VB2. In comparison, the Li-air battery has an energy capacity of 6,200 Wh/l, due to its single-electron-per-molecule transfer and lower density than the other compositions while a typical Li-Ion battery has a capacity of approx 600 Wh/l.

Source: Phys.org

Japan tests 581 km/h Maglev train [VIDEO]

Japan resumes tests on magnetic levitation train intended to travel at speeds up to 581 kilomeres per hour.

Central Japan Railway Co. (JR Tokai) has began full-scale tests of the world's fastest train, the L0 series Maglev.

After completing test drives at 500 kph on the 42.8-kilometer-long Yama-nashi maglev test line stretching from Uenohara to Fuefuki in Yamanashi Prefecture to check such factors as durability, JR Tokai plans to start commercial operations between Tokyo and Nagoya in 2027.

Following a departure ceremony, Land, Infrastructure, Transport and Tourism Minister Akihiro Ota and JR Tokai chairman Yoshiyuki Kasai went for a 505 kph ride on the train.

“We were able to speak normally inside the maglev train [thanks to reduced noise levels]. I’m convinced this is world-class technology,” Ota said.

Testing will take place until fiscal 2016, during which time JR Tokai plans to switch to testing a 12-car train, which will be used on the commercial run.

The link is to be stretched west to Osaka by 2045.

200,000 Fast-Charging Stations for Electric Vehicles by 2020

Total fast-charging stations for EVs are set to reach 199,000 locations globally in 2020, up from just 1,800 in 2012. The number of these stations, meanwhile, is anticipated to rise more than threefold in 2013 to 5,900 and then nearly triple to 15,200 in 2014. Overall growth will continue at a rapid pace through 2020.

Hard charging

"The length of time it takes to recharge an EV continues to be one of the major stumbling blocks inhibiting the widespread adoption of electric vehicles," said Alastair Hayfield, associate research director at IHS Automotive. "Compared to the time it takes to refuel an internal combustion engine (ICE) vehicle, the recharge time for EVs is incredibly slow-at about four hours to charge a 24 kilowatt-hour (kWh)-capacity battery using a 6.6 kW on-board charger. If EV auto manufacturers could overcome this obstacle, it could lead to a high rate of adoption from environmentally minded consumers as well as those seeking to cut gasoline expenses. That's where fast charging comes in."

Hooked up to a fast-charging system, which offers a high-voltage DC charge instead of a slower AC charge, a vehicle can be fully charged in as little as 20 minutes. This could be a major step toward EVs becoming generally equivalent to ICE vehicles when it comes to refueling.

"IHS believes fast charging is a necessary step to promote higher adoption of EVs, but there will need to also be better consumer education regarding behavioral changes that may need to happen when owning an electric vehicle-such as charging overnight or at work," Hayfield said.

Japanese standard charges ahead

One fast-charging standard designed for electric vehicles is dubbed CHAdeMO, a primarily Japanese-backed technology. The major proponents of the technology are Japanese automotive OEMs-including Toyota, Nissan, Mitsubishi; and Japanese industrial giants-including Fuji Heavy Industries Ltd., Tokyo Electric Power Co. and more.

CHAdeMO, roughly translated as "charge for moving," began deployment in 2009 in order to accelerate the adoption of electric vehicles in Japan, where EVs have found positive reception. Today there are as many as 2,445 CHAdeMO fast chargers in operation and more than 57,000 CHAdeMO-compatible EVs around the world. This accounts for as much as 80 percent of all electric vehicles on the road, especially given the high concentration of EVs coming from Japan in the form of the Nissan Leaf, Mitsubishi i-MiEv, Hondo Fit EV and more.

One size charges all

A competing solution to CHAdeMO, aptly named the combined charging system (CCS), offers electric vehicle owners the option of having a single charging inlet that can be used for all available charging methods. That includes 1-phase charging at an AC power source, high-speed AC charging with a 3-phase current connector at home or at public charging stations, DC charging at conventional household installation and DC fast charging at power-charging stations globally.

CCS, which was submitted for international standardization in January of 2011, has garnered the support of Audi, BMW, Daimler, Chrysler, Ford, GM, Porsche and Volkswagen. Already BMW, GM and Volkswagen have announced they will introduce fast-charging EVs based on the CCS standard sometime this year.

Tesla vies to electrify the market

Tesla Motors, the California company most notable for the all-electric Tesla Model S, is driving a third method for fast charging. Tesla is developing its own proprietary network of fast chargers in the U.S. Dubbed "Superchargers," the chargers operate at a higher power rating than current CHAdeMO or CCS chargers, and also have a proprietary plug interface, which means that only Tesla vehicles can use them.

"In addition to the proprietary technology, the charging stations are free to use for Tesla owners, and there are plans to power all stations using photovoltaics," Hayfield said. "These Superchargers represent a powerful proposition for Tesla-drivers can charge faster, have U.S.-wide coverage by 2015 and will charge for free for life. This triple threat will aim to lock drivers into the Tesla experience, and also will give Tesla a perceived advantage over other original equipment manufacturers competing in the same market.

Future charge

Looking ahead to the future of EVs, it's clear that DC charging is becoming the favored means for supporting rapid, range-extension electric vehicles. But it is less clear as to whether CHAdeMO or CCS will win the battle for the consumer.

Japan will continue to utilize CHAdeMO, while Germany is set on using CCS; other nations likely will also utilize CCS as well, since it supports slow-charging. But no matter which solution is used, DC-based fast charging is critical to promoting consumer approval and interest in EVs.

ZF and Levant Partner to Develop Regenerative Suspension

Regenerative brakes are increasingly becoming a popular option on new cars as a way to save energy, and soon that technology could be joined by another engineering breakthrough: a regenerative suspension.

We have reported on Regenerative shock absorber developments including Linear tubular electric motors Here, Here and Here and hydraulic actuator based systems Here and Here.

This technology is being developed by ZF and Levant Power, in hopes of producing a suspension system that combines “the vast gains of active suspension with modest power consumption, minimal complexity and affordable cost,” the companies announced in a release. Essentially, the alliance hopes to build the world’s first fully active and regenerative suspension for automobiles, and make it affordable enough for volume production.

Forming the basis of the technology is an innovative, functional unit that is fitted to the outside of a ZF damper. In the compact unit is its own control unit, an electric motor and an electrohydraulic gear pump. That gear pump is in charge of regulating the oil flow to the damper, allowing it to adapt optimally and automatically to the driving conditions. In addition, the system is even capable of actively raising each individual wheel on the vehicle.

The innovative valve system automatically uses the swaying motion of the damper piston in order to recover energy. The system then guides the oil in the damper, driving the electric pump motor, essentially allowing it to function like a generator. The generated kinetic energy is then turned into electricity which is fed into the vehicle’s power supply.

“We look forward to working closely together with Levant Power. The objective is to develop the world’s first fully active and regenerative suspension, make it ready for volume production and introduce it to the market. Thus, we are promoting efficient innovations that are tailored to meet global requirements,” said Rolf Heinz Rüger, in charge of the Suspension Technology business unit of ZF’s Car Chassis Technology division.

Graphene-Based Supercapacitors Improve Energy Density by 12x

Monash University (Australia) researchers have brought next generation energy storage closer with an engineering first - a graphene-based device that is compact, yet lasts as long as a conventional battery.

Published today in Science, a research team led by Professor Dan Li of the Department of Materials Engineering has developed a completely new strategy to engineer graphene-based supercapacitors (SC), making them viable for widespread use in renewable energy storage, portable electronics and electric vehicles.

SCs are generally made of highly porous carbon impregnated with a liquid electrolyte to transport the electrical charge. Known for their almost indefinite lifespan and the ability to re-charge in seconds, the drawback of existing SCs is their low energy-storage-to-volume ratio - known as energy density. Low energy density of five to eight Watt-hours per litre, means SCs are unfeasibly large or must be re-charged frequently.

Professor Li's team has created an SC with energy density of 60 Watt-hours per litre - comparable to lead-acid batteries and around 12 times higher than commercially available SCs.

"It has long been a challenge to make SCs smaller, lighter and compact to meet the increasingly demanding needs of many commercial uses," Professor Li said.

Graphene, which is formed when graphite is broken down into layers one atom thick, is very strong, chemically stable and an excellent conductor of electricity.

To make their uniquely compact electrode, Professor Li's team exploited an adaptive graphene gel film they had developed previously. They used liquid electrolytes - generally the conductor in traditional SCs - to control the spacing between graphene sheets on the sub-nanometre scale. In this way the liquid electrolyte played a dual role: maintaining the minute space between the graphene sheets and conducting electricity.

Unlike in traditional 'hard' porous carbon, where space is wasted with unnecessarily large 'pores', density is maximised without compromising porosity in Professor Li's electrode.

To create their material, the research team used a method similar to that used in traditional paper making, meaning the process could be easily and cost-effectively scaled up for industrial use.

"We have created a macroscopic graphene material that is a step beyond what has been achieved previously. It is almost at the stage of moving from the lab to commercial development," Professor Li said.

Graphene-Based Supercapacitors Improve Energy Density by 12x

Monash University (Australia) researchers have brought next generation energy storage closer with an engineering first - a graphene-based device that is compact, yet lasts as long as a conventional battery.

Published today in Science, a research team led by Professor Dan Li of the Department of Materials Engineering has developed a completely new strategy to engineer graphene-based supercapacitors (SC), making them viable for widespread use in renewable energy storage, portable electronics and electric vehicles.

SCs are generally made of highly porous carbon impregnated with a liquid electrolyte to transport the electrical charge. Known for their almost indefinite lifespan and the ability to re-charge in seconds, the drawback of existing SCs is their low energy-storage-to-volume ratio - known as energy density. Low energy density of five to eight Watt-hours per litre, means SCs are unfeasibly large or must be re-charged frequently.

Professor Li's team has created an SC with energy density of 60 Watt-hours per litre - comparable to lead-acid batteries and around 12 times higher than commercially available SCs.

"It has long been a challenge to make SCs smaller, lighter and compact to meet the increasingly demanding needs of many commercial uses," Professor Li said.

Graphene, which is formed when graphite is broken down into layers one atom thick, is very strong, chemically stable and an excellent conductor of electricity.

To make their uniquely compact electrode, Professor Li's team exploited an adaptive graphene gel film they had developed previously. They used liquid electrolytes - generally the conductor in traditional SCs - to control the spacing between graphene sheets on the sub-nanometre scale. In this way the liquid electrolyte played a dual role: maintaining the minute space between the graphene sheets and conducting electricity.

Unlike in traditional 'hard' porous carbon, where space is wasted with unnecessarily large 'pores', density is maximised without compromising porosity in Professor Li's electrode.

To create their material, the research team used a method similar to that used in traditional paper making, meaning the process could be easily and cost-effectively scaled up for industrial use.

"We have created a macroscopic graphene material that is a step beyond what has been achieved previously. It is almost at the stage of moving from the lab to commercial development," Professor Li said.

2014 Formula One exhaust energy recovery system explained

In an effort to reduce fuel consumption in Formula One by up to 35% the FIA have introduced wholesale changes to the technical regulations to significantly increased energy harvesting for the 2014 season.

In addition to doubling to power of the Kinetic Energy Recovery System (KERS), first introduced in 2009, from 60 kw to 120 kw and increasing kinetic energy storage by five times from 0.4 MJ/lap to Max 2MJ/lap, a new method of heat-based Energy Recovery System has been introduced.

The regulations refer to the two devices as the ‘Motor Generator Unit – Kinetic’ (MGU-K) and ‘Motor Generator Unit – Heat’ (MGU-H). The latter uses heat energy from the turbo to generate electrical energy.

The MGU-H unit captures waste heat as it is dispelled from the exhaust turbocharger via an electric generator attached to the turbocharger shaft. This waste heat energy is stored as an electrical charge adding an additional 2MJ/lap to KERS resulting in 10x - 4MJ compared to 400 kJ - as much electric power boost per lap compared to 2013 KERS.

2014 V6 Engine Q & A with MERCEDES AMG PETRONAS

What can you tell us about the 2014 engine?

First of all, let’s mention the rules rather than the engine. For 2014, the rules specify a maximum race fuel allowance of 100 kg – compared to a typical race fuel load of around 150 kg today, although that’s not fixed by the rules.

That means we have one third less fuel to complete the same race distance with – and we want to do it at the same speed. So we need a powertrain that’s 30% more energy efficient.

And that’s where the new engine comes in?

Well, it’s not really just an engine any more. Without getting too technical, Article 1.22 of the Technical Regulations now refers to what’s called a ‘Power Unit’. This comprises an ICE (Internal Combustion Engine), an ERS (Energy Recovery System) and all the ancillaries needed to make them work.

But why a Power Unit? Well, today’s V8 essentially features a “bolt-on” KERS Hybrid system that was added during the engine’s life. The 2014 Power Unit has been designed with integrated hybrid systems from the very beginning.

Interesting. F1 loves jargon, so ICE and ERS sound just perfect. What do they mean?

The ICE is the traditional engine in the Power Unit package. 1.6 litre capacity, turbocharged, and with direct fuel injection at a pressure of up to 100 bar. Where the current engines rev to 18,000 rpm, the ICE is limited to 15,000 rpm from 2014.

As for ERS, it’s like KERS on steroids: not only can we still harvest energy from and deploy energy to the rear axle, we can now do the same from the turbocharger; the kinetic machine is called MGUK (Motor Generator Unit Kinetic) and the machine on the turbo an MGUH (‘h’ for heat).

In total, we are allowed to harvest and deploy energy at twice the power to the rear axle – so 161 hp compared to 80.5 hp today. And we are allowed to deploy ten times as much energy – 4MJ compared to 400 kJ. Simply put, that means a bigger power boost for a higher percentage of the lap.

And that’s what helps improve the efficiency?

Exactly. Part of the efficiency gain comes from the ICE, which runs at lower speeds with fewer moving parts than the V8 and the benefit of turbocharging; but the other part is to be found in the ERS.

Today, the fuel energy we combust in the engine then has one possible energy journey to improve system efficiency, via the KERS system.

In 2014, there will be up to seven possible energy journeys to keep energy within the vehicle rather than wasting it through the exhausts and brakes.

Sound pretty impressive. Will it be exciting for the fans?

We believe so. The target is to achieve the same power output of around 750 hp but to do so using around 30% less fuel.

In terms of sound, the engine note is not as loud as the current V8 because of two factors: the lower engine speed and the fact that the turbocharger sits in the exhaust flow, recovering energy from it that would otherwise be lost as heat and sound.

But because of the mechanical balance of a V6 engine, it also sounds sweeter. And we’re confident that fans will find it pretty exciting when they hear it at the track.

What impact will it have on the racing?

First of all, the engine is going to produce a lot more torque than the current V8 and over a wider power band.

That means the car is going to be grip limited on corner exit, in technical terms; in layman’s terms, they’re going to be a handful for the drivers.

The next point is that it will reward the most intelligent drivers - the fastest way to finish a race will not always be straightforward and the cleverest drivers will probably adapt fastest to the new challenges.

So will we see F1 turned into an economy run – or cars running out of fuel in the latter stages?

Unlikely. Managing fuel consumption is already a critical part of F1 and it will remain so in 2014; for example, did you know that our V8 can complete a race distance today using 11.6% less fuel than it did in 2006?

Today, teams are very good at monitoring fuel consumption: we track each injection of fuel into each cylinder so we know exactly how much fuel is being used. And there are over five million injections in an average race!

Ultimately, the smartest driver in the quickest car will be successful in 2014, which remains true to the fundamental challenge of Formula One. What we’re really doing is putting the ‘motor’ back into ‘motorsport’.

New 311mph Maglev Train in Japan passes initial tests

Engineers with Central Japan Railway Co. have put their newest maglev L0 train through initial testing and report the new high-speed train is on course for commercial deployment by 2027. The train...

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]