Tesla to unveil Model 3 and Model S Dual Drive Oct. 9: report

Tesla Motors will unveil its Model 3, the mass-market car, and new versions of the Model S sedan at the event Oct. 9, analyst Trip Chowdhry with Global Equities Research said in a note Friday.

It is no coincidence the event is to take place in the Los Angeles area rather the San Francisco Bay Area, where the electric-car maker is headquartered: Tesla's top designer "spends almost 90% of this time in the LA Design Center," Chowdhry said.

Tesla earlier Friday said the event was scheduled for 7 p.m. at the Hawthorne airport. By showing a Model 3 prototype Tesla is also hoping to garner more attention from potential "gigafactory" investors, he added.

The new Model S versions would have all-wheel drive and semi-autonomous driver-assistance system.

German scientists invent award winning 2-in-1 motor for electric cars

Scientists from Nanyang Technological University (NTU) and German Aerospace Centre (DLR) have invented a 2-in-1 electric motor which increases the range of electric vehicles.

This innovative engine integrates the traditional electric motor with the air-con compressor, typically two separate units. This novel, space-saving design allows the use of bigger batteries, which can increase the range of electric vehicles by an additional 15 to 20 per cent.

Prof Subodh Mhaisalkar, Executive Director of the Energy Research Institute @ NTU (ERI@N), said: “The biggest challenge with electric cars in tropical megacities is the range that they can travel on a full-charge, because their batteries are needed to power both the engine and the air-conditioning. In tropical countries like Singapore, up to half the battery’s capacity is used to power the air-conditioning system.”

The new 2-in-1 design allows the electric motor to be more efficient in powering the car’s wheels, while its integrated air-con compressor uses less power due to synergy between the engine and the compressor, which can also tap on energy regenerated directly from the car’s brakes.

With the potential boost in range through the efficient use of energy, the joint invention recently won the Best Originality Award in the TECO Green Tech International Contest held in Taiwan.

The competition saw 19 entries from top universities including Boston University, University of California (UCLA), Waseda University, and universities from China and Russia.

NTU’s partner, DLR, the German aerospace and space agency will conduct further tests and improvements to the new engine with the aim of eventual commercialisation. The team is applying for a Proof-Of-Concept (POC) grant in Singapore. After the development of the prototype, test bedding and refinements will be done at DLR’s facilities in Germany.

Prof Mhaisalkar, said this innovation will pave the way for extending the range of electric cars, as the integrated design combines the two of the most important parts of an electric car, thus reducing its complexity into one highly efficient solution.

“With the global population of electric vehicles set grow rapidly to 20 million in 2020, a more efficient electric motor cum air-con compressor, will enable cars to travel further on a single charge,” added Prof Mhaisalkar. “This energy efficiency will in turn reduce overall greenhouse emissions and promote sustainable transportation solutions.”

“This integrated design solution for air conditioning will go a long way in reducing the range anxiety of drivers, reduce maintenance costs, and will save time and money for the driver.”

For the automobile manufacturers, the new electric motor will also cost less to produce, as it requires less material than its counterparts. Both the weight and size of the electric motor are reduced, creating more space for other components such as an auxiliary battery source.

Dr Michael Schier, from DLR’s Institute of Vehicle Concepts, said: “For electric vehicles, the air conditioning uses a lot of electrical energy, thereby cutting down the range of electric cars by up to 50 per cent. To increase the energy efficiency and therefore the range of electric cars, the thermal management and the integration of additional functions into existing powertrain components play a major role.”

“By integrating the refrigerant compressor directly into the electric motor, we save components, weight and cost. Simultaneously, the more regenerative braking part of the kinetic energy is passed directly to the refrigerant compressor and thus the efficiency is further increased,” added Dr Schier.

Research scholar Mr Satheesh Kumar from the Energy Research Institute @ NTU said his award-winning, integrated electric motor challenges conventional design that goes way back to the 1960s when air-conditioning first became popular.

“Back then, air-conditioning was something new that was an add-on feature to a car’s combustion engine,” said the 29-year-old Singaporean.

“Since we are now designing electric vehicles from scratch, I see no reason why we should keep both units separate. As we have proven, combining the two gives us synergy – a more efficient use of electricity and it also improves engine braking, which stops the car faster with lesser wear on the brake pads.”​

This research is part of NTU’s focus on sustainability research. Sustainable Earth and Innovation are two of NTU’s Five Peaks of Excellence, which are areas of research that the university hopes to make its global mark in. The other three peaks are Future Healthcare, New Media, and the Best of East and West.

Nissan Engineers create a LEAF Ute [VIDEO]

If necessity is the mother of invention, engineers fuel that fire at Nissan's Technical Center in Stanfield, Arizona. Here engineers are plentiful. They love to build things, test things and tinker with things. This team thinks a lot about "why not?" Recently they created a one-of-a-kind electric vehicle to haul supplies and people around on the tech center property.

"We tried to keep it a secret and be exciting for everybody. But we have visitors and they come and they see that truck and they go straight to 'what is it?' and they start looking at it, and it makes great conversation," said Roland Schellenberg, Nissan Durability & Reliability.

This is Sparky, as he's known around the campus. It is a Nissan LEAF crossed with a Nissan Frontier, brought to life by Nissan's Roland Schellenberg and Arnold Moulinet. Sparky is a one-of-a-kind creation with a specific mission in life. He supports operations at Nissan's proving grounds located on 3,050 acres in Stanfield, Arizona.

"I needed a project for a team building activity so we can bring the team together. We had a need for a truck. Something to drive around, a shop truck," said Schellenberg.

It was months in the making, and there were many considerations, but Arnold Moulinet, Schellenberg's colleague in the Durability & Reliability group, had the right tool-set to fabricate the vehicle into reality.

"After he (Schellenberg) told us it was going to be the LEAF that we would redo, I went home and stayed up till like four in the morning making all kinds of designs for what would work. We basically got the stock LEAF, and after reviewing a bunch of designs of pickup trucks that we have here at Nissan, we decided to go with a Frontier bed. My main job here is working on rough-road vehicles, rough-road testing. I'm pretty good at taking cars completely apart to the bare frame and putting them back together again to resume testing," said Moulinet.

The low-desert terrain at Nissan's technical center provides an ideal environment to test vehicles for hot weather, heat durability, engine cooling and air conditioner performance. There is also a 5.7-mile high-speed oval and four individual road courses designed to test vehicle durability, reliability and ride comfort. Sparky now is part of the support team to help operations run smoothly.

"Being a slick truck, and not so tough, I see it as a boy – but a boy with a heart. It's something that we all put together. We all share. So it has a little bit of everybody in there," said Schellenberg.

Bugatti plan new 1500 hp Hybrid with axial flux motor & electric turbos

Autocar report that a new Bugatti Veyron is currently undergoing initial conceptual engineering tests in a programme aimed at unveiling the car in 2016 prior to a planned start to customer deliveries the following year. According to sources close to Bugatti, early test 
mules for the new car exist 
and have already been 
pressed into action in an 
early round of testing.

“Five developmental prototypes with differing powertrain combinations have been constructed up to now,” said one insider. “They are based on the existing car 
but use various solutions 
that are being considered for the new model.”

Following recent arrivals such as the McLaren P1, Porsche 918 Spyder and LaFerrari, the new Bugatti will feature a battery powered hybrid electric powertrain. The same quad-turbocharged 8.0-litre W16 powerplant as 
its predecessor will be retained but with the possible addition of electric turbochargers, perhaps along the lines of those used by Porsche in LMP1 (Porsche and Bugatti are both part of the VW group) and the 2014 Formula One KERS MGU-H (where the H stands for heat).

The big news centres around plans to provide the new Bugatti with hybrid drive by way of a disc-shaped Axial Flux electric motor mounted within the gearbox housing. Together, the petrol engine and electric motor are said to deliver up to 1500 hp. By comparison, the Veyron Super Sport has 1183 hp.

Autocar sources suggest that torque will be capped at 1500 Nm for the sake of gearbox reliability. A Veyron Super Sport already has 1500 Nm from 3000 to 5000 rpm. With an Axial Flux AC Induction motor able to generate almost as much torque (1250 Nm from the EE in-wheel motor) The Bugatti hybrid electric powertrain design looks like a very conservative step with full potential limited by the fragility of it's mechanical driveline.

The new hybrid Veyron should have some fairly startling performance in electric only mode (if it has one - see LaFerrari), but in parallel mode, other than providing torque fill below 3,000 rpm, (partly explaining why Bugatti expect 0-100 km/h times to drop to 2.3 sec) the full potential of the hybrid powerplant will be restricted by a mechanical transmission layout that may not have moved on much from the current Veyron.

As with the McLaren P1, a hybrid that still idles in traffic, or the LaFerrari which has no pure EV mode, the new Bugatti may succeed in combined the superior low rpm torque characteristics of an electric motor to give the instant throttle response and acceleration of an EV, what McLaren call 'torque fill', with the enormous top end torque of a large displacement forced induction ICE, but in common with the aforementioned hybrid hypercars, it will be very much a first generation mild hybrid.

We will have to wait for future evolutions of hybrid supercar powertrain design before we see anything truly revolutionary.

Audi planning to challenge Tesla with 500-700 km range EVs

Audi this week proudly launched their first plug-in hybrid, the A3 Sportback e-tron, a full 17 years after the Prius.

Auto Bild has revealed Audi plans to catch-up with the competition in automotive electrification with two purely electric Audi SUV, the A2Q and Q6 expected around 2017/18.

A2Q with up to 500 km electric range

If the expected advances in battery technology are true, the compact A2Q, expected in 2016, will have 500 km battery range. Seen as a competitor against BMW's i3, Audi will not develop a completely new electric platform but uses the familiar MQB modular architecture of Golf/A3.

Audi Q6 as Tesla competitor

The Q6, internally designated within Audi as the Tesla Fighter, is expected to be a coupe-like offshoot of the Q5 and come with 700 km battery range with a launch date around 2017. A larger battery powered Q7/8 is also expected around 2017.

BMW i9 Supercar to launch in 2016

Auto Motor und Sport is reporting on a future BMW i9 due to launch in 2016. In the same very year, BMW is celebrating 100 years.

BMW i9 would be based off the i8 hybrid sports car with more power and a beefier appearance. Still featuring a plug-in hybrid, the BMW i9 is said to forgo the 1.5 liter three-cylinder engine in favor for a larger one and with more power.

Furthermore, the i9 would also get a bigger electric battery which will generate more than the 131 hp found in the i8.

Lightweight materials and construction remain top priorities for BMW so if it comes to life, expect the i9 to feature even more carbon fiber and aluminum parts. The i9 will retain the perfect 50:50 weight distribution.

From 0 to 100km/h, the BMW i9 is rumored to run in under 4 seconds and with a top speed above 155 mph.

QUANT e-Sportlimousine with nanoFLOWCELL drive [VIDEO]

nanoFLOWCELL AG introduced their QUANT e-Sportlimousine concept at the Geneva Motor Show earlier this year and the company has just announced the car has been approved for road use in Europe.

The company says this is a critical step because they are "working at top speed" on a production version. nanoFLOWCELL AG chief technical officer Nunzio La Vecchia went on to say "This is a historic moment and a milestone not only for our company but perhaps even for the electro-mobility of the future. For the first time an automobile featuring flow-cell electric drive technology will appear on Germany's roads."

The heart of the QUANT e-Sportlimousine prototype is the nanoFLOWCELL® battery. It gives the car a driving range of 600 kilometres. The newest product moving the world towards attractive electrical mobility was conceived at the nanoFLOWCELL DigiLab simulation lab at nanoFLOWCELL AG in Zurich, Switzerland. It is still under active development and the results so far are extremely promising.

Drivetrain:

All-wheel drive via 4 three-phase induction motors, torque vectoring for optimal drive torque distribution
Peak power: 680 KW (925 PS); 170 KW (231.2 PS) x 4
Operating power: 480 KW (653 PS); 120 KW (163.2 PS) x 4

nanoFLOWCELL:

nominal voltage: 600 V
nominal current: 50 A
tank capacity: 2 x 200 L

Performance:

0 - 100 KM/H: 2.8 S
top speed: 380 + KM/H
range: projected 400 to 600 KM
energy consumption: 20 KWH/100 KM

Dimensions and weight:

kerb weight with full tanks: 2,300 KG
wheelbase: 3,198 MM

Exagon Furtive-eGT electric supercar ready for production

The Furtive-eGT has been around in concept form since 2010 and a few may even have been delivered, but now Exagon appears ready to go into serial production.

The Exagon Furtive eGT electric supercar is powered by a pair of 300 kW Siemens electric motors that combined have the potential to deliver up to 600 kW / 516 Nm, the car is exceptionally rapid. Power is transferred to the rear wheels and Exagon says throttle response is virtually instantaneous, delivering a 0-100km/h sprint of just 3.5 seconds, faster than a Tesla Roadster.

The car has a top speed of 250km/h and the electric motors are energised by a hefty 53kWh lithium-ion battery which provides a range of around 300km but Exagon will option a small range-extender engine to charge the batteries on the run, which gives the car a theoretical 730km range.

The Exagon Furtive eGT has four seats and features a monocoque light carbon fiber body, which weighs an astonishingly low 124 kg. The manufacturer is also offering a wide selection of personalization options, while the price and availability are set to be announced at a later date.

ER-A RaceAbout EV sets new speed record 285,31 km/h [VIDEO]

Metropolia Electric RaceAbout road legal electric vehicle top speed record 285,31 km/h at Lappeenranta airport during Unlimited Racing event on June 28th 2014.

Driver Janne Laitinen the car recorded 0-100 km/h, 6,3s & 0 - 100 mph, 10,6s.

The E-RA has a 33 kWh Altairnano lithium-titanate battery which powers four-electric motors that develop a peak output of 383 PS (282 kW / 378 bhp) and 3,200 Nm (2,360 lb-ft) of torque. This enables the 1,700 kg (3,747 lb) prototype to accelerate from 0-100 km/h in approximately six seconds and travel approximately 200 km (124 miles) on a single charge. At top speed the E-RA consumed around 1250 Wh/km measured as energy required from grid to recharge the battery.

Harley-Davidson Reveals Project LiveWire EV Concept [VIDEO]

Innovation, meet heritage. Today, Harley-Davidson reveals Project LiveWire – the first Harley-Davidson® electric motorcycle.

In keeping with the company's customer-led product development approach, starting next week select consumers across the country will be able to ride and provide feedback on the bike, helping to shape the future of Harley-Davidson's first-ever electric motorcycle.

While not for sale, Project LiveWire is specifically designed for the purpose of getting insight into rider expectations of an electric Harley-Davidson motorcycle.

"America at its best has always been about reinvention," said Matt Levatich, President and Chief Operating Officer, Harley-Davidson Motor Company. "And, like America, Harley-Davidson has reinvented itself many times in our history, with customers leading us every step of the way. Project LiveWire is another exciting, customer-led moment in our history."

Spurred by this heritage, the Project LiveWire Experience invites customers to test ride, provide feedback and learn more about the story of the motorcycle. Even those who don't yet ride will have the opportunity to feel the power of Project LiveWire through Jumpstart – a simulated riding experience.

A 2014 U.S. tour – kicking off with a journey down Route 66 – will visit more than 30 Harley-Davidson dealerships now through the end of the year. In 2015, the Project LiveWire Experience will continue in the U.S. and expand into Canada and Europe.

"This builds on many recent reinvention successes for Harley-Davidson," said Levatich. "In just the last few years, we've broadened our reach to serve an increasingly diverse society, as well as reinvented our approach to product development and manufacturing. This has resulted in cutting-edge products like the recently launched Project Rushmore touring bikes, Harley-Davidson Street 500 and 750 models and this reveal of Project LiveWire."

An Innovative Approach to Advance the Possibilities of Personal Freedom This exciting new ride blends the company's styling heritage with the latest technology to deliver a new expression of the signature Harley-Davidson look, sound and feel.

"Project LiveWire is more like the first electric guitar – not an electric car," said Mark-Hans Richer, Senior Vice President and Chief Marketing Officer, Harley-Davidson Motor Company. "It's an expression of individuality and iconic style that just happens to be electric. Project LiveWire is a bold statement for us as a company and a brand."

The bike offers a visceral riding experience with tire-shredding acceleration and an unmistakable new sound.

"The sound is a distinct part of the thrill," said Richer. "Think fighter jet on an aircraft carrier. Project LiveWire's unique sound was designed to differentiate it from internal combustion and other electric motorcycles on the market."

Longer term plans for retail availability of Project LiveWire will be influenced by feedback from riders along the Project Livewire Experience tour.

"We offer a no excuses riding experience in everything we do and we are led by what our customers tell us matters most," said Richer. "Because electric vehicle technology is evolving rapidly, we are excited to learn more from riders through the Project LiveWire Experience to fully understand the definition of success in this market as the technology continues to evolve."

Helping Preserve and Renew the Freedom to Ride for Generations As riding in the great outdoors is one of the best elements of motorcycling, sustainability remains a core strategic focus at Harley-Davidson.

"Preserving the riding environment is important to all of us," said Levatich. "Project LiveWire is just one element in our efforts to preserve and renew the freedom to ride for generations to come. As a company that has seen success for 111 years, we think in generational terms about our great riding environments for the next 111 years."