Category: EV Concept

Posted on

700 hp Audi Sport e-tron quattro plug-in hybrid to début @ 2014 CES

Dynamic design, immense power and new electronic features: Audi is presenting a fascinating technology concept car at the Consumer Electronics Show (CES) from January 6 to 10, 2014 in Las Vegas, USA. The Audi Sport quattro laserlight concept is reminiscent of the classic Sport quattro of 1983 while pointing towards the future – with the latest of the brand's technologies in plug-in hybrid drives, user control and display interfaces and lighting technology.

“The new show car demonstrates technical ‘Vorsprung’ on many levels,” says Prof. Dr. Ulrich Hackenberg. “On-board this car we have e-tron technology with 515 kW of power and 2.5 l/100 km (94.09 US mpg) fuel economy; laser headlights that leave all previous systems in the dark with its higher performance as well as new display and operating systems with cutting-edge electronic performance. We are showing the future of Audi here.”

The coupe, a new evolutionary stage of the Sport quattro concept, painted in the color Plasma Red, combines the power of the historic Sport quattro with emotional elegance. Its body is tautly set over its large wheels. The overhangs are short, and the car's proportions show a sporty balance. With a wheelbase of 2,784 mm (109.61 in), it is 4,602 mm (181.18 in) long. At a width of 1,964 mm (77.32 in), the two-door model is very wide, and it is just 1,386 mm (54.57 in) tall, which is exceptionally low.

In the dual headlights, a typical quattro feature, Audi is demonstrating the future of lighting technology by combining matrix LED and laser light technologies. Two low-profile trapezoidal elements are visible within the headlights – the outer one generates the low beam light using matrix LEDs and an aperture mask, while the inner element produces laser light for high-beam functionality.

The powerful laser diodes are significantly smaller than LED diodes; they are only a few microns in diameter. Illuminating the road for a distance of nearly 500 meters (1,640 ft), the laser high-beam light has approximately twice the lighting range and three times the luminosity of LED high beam lights. In this future technology, Audi is once again demonstrating its leadership role in automotive lighting technology with a system that will also be used on the race track in the 2014 R18 e-tron quattro.

The angular, swept-back C pillars of the Audi Sport quattro laserlight concept car and the blisters above the fenders are other design elements reminiscent of the classic Sport quattro. The broad shoulders of the body were reinterpreted and intensively sculpted to convey even greater dynamism. Throughout the car, sharp contours frame muscular surfaces – the interplay between convex and concave curvatures defines the athletic character of the coupe.

The hexagonal single-frame grille also offers an outlook on future design of the sporty production models. The lower section is nearly vertical, while the upper follows the contour of the hood; the screen insert is a typical solution from car racing. The low grille emphasizes the show car's width. Two large, vertical blades divide each of the large air inlets; their form is repeated in the creases of the hood. The splitter, which is made of carbon fiber reinforced polymer (CFRP), is shifted far to the front, as on a race car.

The combination of a swept-back glass cabin and broad shoulders defines the proportions at the rear. Another defining element at the rear of the show car is the CFRP diffuser, which extends upward significantly. Its upper section is honeycombed, while its lower section houses two large, oval tailpipes. The tail lights, which are backed by a black CFRP panel, are rectangular in form – another quattro reference. The luggage space, which is reinforced by a large cross bar stiffener, offers 300 liters (10.59 cu ft) of cargo capacity.

Precise design details round out the dynamic look of the Audi Sport quattro laserlight concept. The sill extensions are made of CFRP, the door handles electrically extend from the door when they detect the approach of a hand. The center locking wheels have a five twin-spoke design.

Lightweight design made visible: the interior

In its generously cut interior, the elegant sporty styling of the show car is continued with dark gray colors and clean lines. The interior design and material selections demonstrate the Audi philosophy of lightweight design. The slender instrument panel is reminiscent of the wing of a sailplane. The supporting structure of the interior is a carbon shell that also serves as a storage compartment in the doors.

A line of trim beneath the windshield wraps around the driver and front passenger and integrates functions such as the inside door handles. The folding race car shell seats with their high lateral supports and integrated head restraints, together with the two rear seats, provide space for four persons. The climate controls are integrated in the air nozzles; a single element is used to control the intensity, temperature and volume of the air stream. In addition to showing climate control settings, the slim display at the centers of the air nozzles also shows media data.

New solutions: displays and controls

The interior of the Audi Sport quattro laserlight concept focuses very much on the driver. Even the multifunction sport steering wheel points the way towards future sporty production solutions. It has two buttons which the driver can use to control the hybrid drive, a red start-stop button, a button for the Audi drive select vehicle handling system and a "View" button to control the Audi virtual cockpit.

All key information is shown on the large Audi TFT display in high-resolution, three-dimensional graphics; a cutting-edge Tegra 30 processor from Audi partner Nvidia processes the graphics. The driver can switch between different modes. For example, in the MMI mode the dominant display elements include the navigation map and media lists, while in the Classic view the speedometer appears in the foreground.

Nearly all functions of the Audi Sport quattro laserlight concept can be controlled from the further developed MMI terminal that is mounted on the center console over the tunnel. Its large rotary pushbutton, which also serves as a touchpad, can be pushed in four directions, and it is surrounded on three sides by four buttons – for the main menu, submenus, options and a back function.

The new user interface has a menu structure whose intuitive layout is similar to that of a smart phone. All frequently used functions can be accessed lightning fast. For most inputs, just a few steps are needed thanks to a new free text search feature; generally just four characters suffice for a navigation address. The driver can quickly scroll through lists or zoom the map image using multitouch gestures on the touchpad. Voice control functionality has also been intensively further developed.

Powerful and highly efficient: the drive system

The plug-in hybrid drive gives the Audi Sport quattro laserlight concept fascinating dynamic performance. Its system output is 515 kW (700 hp), and its system torque is 800 Nm (590.05 lb-ft). Power flows via a modified eight-speed tiptronic to the quattro drivetrain, which features a sport differential at the rear axle. The show car's combined fuel consumption, based on the applicable fuel economy standard, is just 2.5 liters of fuel per 100 km (94.09 US mpg) – which equates to CO2 emissions of 59 g/km (94.95 g/mile).

The combustion engine is a four-liter V8 with biturbo charging; it produces 412 kW (560 hp) of power and 700 Nm (516.29 lb-ft) of torque. The cylinder on demand (COD) system, which deactivates four cylinders under part load and a start-stop system make the sonorous eight-cylinder engine very efficient. Located between the 4.0 TFSI and the transmission is a disc-shaped electric motor that produces 110 kW and 400 Nm (295.02 lb-ft). It draws its drive energy from a lithium-ion battery at the rear, which stores 14.1 kWh of energy – enough for up to 50 km (31.07 miles) of all-electric driving. An Audi wallbox that is used for charging provides for optimal energy transfer.

An intelligent management system controls the interplay of engine and motor on demand. The driver can switch between three different modes. In EV mode, just the electric motor operates; its high torque propels the show car with plenty of power – even outside of the city. The active accelerator pedal indicates the transition to Hybrid mode to the driver – by a change in pedal resistance; this is done so that the driver can intentionally influence the mode selection.

The Hybrid mode aims at optimal fuel-savings in the interplay between the TFSI and the electric motor, and environmental and route data are utilized here. The driver can choose the Hold and Charge modes in the MMI to influence the operating strategy, e.g. if the driver wants to ensure that sufficient electrical energy is available for the final kilometers to the destination. The Audi drive select dynamic vehicle handling system offers even more control options – individual driving profiles are set up for different levels of regenerative braking.

In Sport mode, the operating strategy configures the drive system for maximum power. When the V8 and electric motor are boosting, the Audi Sport quattro laserlight concept accelerates from a standstill to 100 km/h (62.14 mph) in 3.7 seconds and can reach a top speed of 305 km/h (189.52 mph).

Body and chassis

A lightweight design strategy also plays a major role in the car's dynamic performance. A combination of ultra high-strength steel sheet and structural elements of cast aluminum is used in the occupant cell. The doors and fenders are made of aluminum, and the roof, engine hood and rear hatch are made of CFRP. This results in an unladen weight of just 1,850 kilograms (4,078.55 lb), including the large battery pack.

The front suspension is comprised of five links per wheel, while the rear suspension is based on the self-tracking trapezoidal link principle of Audi, which guarantees dynamic performance and stability. Stiff tuning of the springs and shock absorbers make the Audi Sport quattro laserlight concept hold tightly to the road, while Audi drive select makes the driving experience even more multifaceted. The dynamic steering system varies the steering ratio as a function of driving speed. The brake calipers grip large, carbon fiber-ceramic brake discs, and the tire size is 285/30 R 21.

Posted on

Airbus signs MoU to develop electric taxiing for A320 Family

As part of on-going research and development into future technology options, Airbus has signed a memorandum of understanding (MoU) with EGTS International, a joint venture company between Safran and Honeywell Aerospace, to further develop and evaluate an autonomous electric pushback and taxiing solution for the A320 Family.

The agreement marks the selection of EGTS International’s Electric Green Taxiing System to be evaluated as a new option on the A320 Family – referred to by Airbus as eTaxi. This option would allow the aircraft to push-back from the gate without a tug, taxi-out to the runway, and return to the gate after landing without operating the main engines.

eTaxi will use the aircraft’s Auxiliary Power Unit (APU) to power electric motors fitted to the main landing gear wheels. The architecture will include the ability for pilots to keep full control from the cockpit over their aircraft’s speed and direction during taxi operations.

Olivier Savin, EGTS Programme Vice President, Safran said: “We are extremely pleased to strengthen our relationship with Airbus, a key customer and industry leader in innovation. Through this agreement we are creating the ideal context to collaborate to best utilize our own landing gear systems expertise to develop a green taxiing solution for the A320 Family.”

Brian Wenig, EGTS Programme Vice President, Honeywell Aerospace said: “Following our demonstration of the technology at this year’s Paris Airshow, this MoU marks the next critical milestone in the advancement of the Electric Green Taxiing System as an option for Airbus’ A320 Family, by securing Airbus’ support in the development of the system. Airbus will provide extremely valuable insight to facilitate a seamless integration into the aircraft.”

Daniel Baubil, Airbus EVP, Head of A320 Family Programme said: “Today Airbus delivers the world’s most eco-efficient single-aisle aircraft – the A320 Family. This is the result of our permanent research for innovative enhancements to make our aircraft even more efficient and capable.” He adds: “We therefore look forward to working with our EGTS International expert partners – Honeywell and Safran – with whom we share the common view that the A320 Family is a natural fit for an electric taxiing capability.”

The eTaxi option will offer several operational and environmental benefits for the A320 Family:

  • Per trip, the projected fuel savings and CO2 reductions would be approximately four percent;
  • It would contribute to significantly more efficient taxiing operations and save around two minutes of time on pushback;
  • Taxiing-related carbon and nitrous oxide emissions would be cut by more than half.

    Over the next few months the partners will jointly develop and present a global commercial case and implementation plan to determine the feasibility of an electric taxiing solution for the A320 Family. To this end, Airbus and EGTS International are reinforcing their existing teams to finalize validation studies, define specifications and converge on market requirements for a fully tailored forward-fit and retrofit technological solution.

    To regularly enhance the A320 Family’s capabilities and performance, Airbus invests approximately 300 million euros annually in keeping the aircraft highly competitive and efficient. More than 10,000 A320 Family aircraft have been ordered and over 5,800 delivered to operators worldwide. With a record backlog of over 4,200 aircraft, the A320 Family reaffirms its position as the world’s best-selling single-aisle aircraft family.

    • Posted on

    Kawasaki “J” EV Motorcycle Concept [VIDEO]

    The Kawasaki J has three wheels. However it uses more than one mode, allowing it to transition to a sports bike, making the two front wheels mesh together. In that mode, the vehicle also lowers, closer to the ground.

    The bike was recently unveiled at the Tokyo Motor Show. Housing an all electric motor, when the rider is taking part in leisurely, slow cruises, or stop and go trips through the city, the two wheels remain separated and the handlebars raise offering the driver more comfort.

    It's during the fast speed, highway type of rides, the tires comes together and the bars lower, allowing the rider to have optimal positioning and posture.

    The basic idea behind the bike is for it to stretch out as speeds increase. The radical and mean looking machine has been generating some serious buzz since the premiere, however it is just a concept for now.

    Kawasaki did not release any plans to put it into production.

    Posted on

    Ford Reveals Automated Fusion Hybrid Research Vehicle

    Taking the next step in its Blueprint for Mobility, Ford today – in conjunction with the University of Michigan and State Farm® – revealed a Ford Fusion Hybrid automated research vehicle that will be used to make progress on future automated driving and other advanced technologies.

    The result of an ongoing project that builds on more than a decade of Ford's automated driving research, the Fusion Hybrid automated vehicle will test current and future sensing systems and driver-assist technologies. Ford's goal is to advance development of new technologies with its supplier partners so these features can be applied to the company's next generation of vehicles.

    "The Ford Fusion Hybrid automated vehicle represents a vital step toward our vision for the future of mobility," said Ford Executive Chairman Bill Ford. "We see a future of connected cars that communicate with each other and the world around them to make driving safer, ease traffic congestion and sustain the environment. By doing this, Ford is set to have an even greater impact in our next 100 years than we did in our first 100."

    Today's Ford vehicles already have technology that enables them to park themselves, understand a driver's voice commands, detect dangerous driving situations and assist with emergency braking. With these technologies and others that one day could allow a person to be driven to a destination, the driver always will need to be in control of the wheel if necessary.

    "In the future, automated driving may well help us improve driver safety and manage issues such as traffic congestion and global gridlock, yet there are still many questions that need to be answered and explored to make it a long-term reality," said Raj Nair, group vice president, Ford global product development. "With the automated Ford Fusion Hybrid research project, our goal is to test the limits of full automation and determine the appropriate levels for near- and mid-term deployment."

    The automated Fusion Hybrid will serve as the research platform to develop potential solutions for these longer-term societal, legislative and technological issues raised by a future of fully automated vehicles.

    The Fusion Hybrid research vehicle builds on driver-in-control studies conducted in Ford's VIRTTEX driving simulator. Using VIRTTEX, Ford researchers study how to merge the capabilities of human and automated drivers to create a seamless, integrated experience.

    Ford's Blueprint for Mobility
    Last year at the Mobile World Congress in Barcelona, Bill Ford outlined Ford Motor Company's Blueprint for Mobility – a plan that describes what the automaker believes transportation will look like in 2025 and beyond, and the technologies, business models and partnerships needed to get there.

    Today, Ford is working on improving technology already used in vehicles on the road. This includes functions that alert drivers to traffic jams and accidents, and technologies for parking and for driving in slow-moving traffic.

    In the mid-term, vehicle-to-vehicle communications will begin to enter into the mainstream. This will include some autopilot capabilities, such as vehicle "platooning," where vehicles traveling in the same direction sync up their movements to create denser driving patterns.

    In the longer-term, vehicles will have fully autonomous navigation and parking. They will communicate with each other and the world around them, and become one element of a fully integrated transportation ecosystem. Personal vehicle ownership also will change as new business models develop. The benefits include improved safety, reduced traffic congestion and the ability to achieve major environmental improvements.

    Tomorrow's technology, today
    The Ford Fusion Hybrid was chosen as the test platform for the new research effort because it is among the leaders in offering the most advanced driver-assist technologies in its class.

    These technologies include Blind Spot Information System, active park assist, lane-departure warning, and adaptive cruise control and collision warning with brake support. These vehicle sensing systems, offered on many Ford vehicles today, are the building blocks for the future of fully automated driving.

    In North America, these technologies can be found on Ford Focus, C-MAX hybrids, Fusion, Taurus, Escape, Explorer and Flex. In Europe, these technologies are available on Ford C-MAX, Mondeo, S-MAX and Galaxy.

    "Products such as Ford Fusion Hybrid give us a head start in the development of automated features," said Paul Mascarenas, chief technical officer and vice president, Ford research and innovation. "Our Blueprint for Mobility aligns the desired outcomes of our work in automated functionality with the democratization of driver-assist technology found on today's lineup of Ford products."

    Ford's Fusion Hybrid research vehicle is unique in that it first uses the same technology found in Ford vehicles in dealer showrooms today, then adds four scanning infrared light sensors – named LiDAR (for Light Detection And Ranging) – that scan the road at 2.5 million times per second. LiDAR uses light in the same way a bat or dolphin uses sound waves, and can bounce infrared light off everything within 200 feet to generate a real-time 3D map of the surrounding environment.

    The sensors can track anything dense enough to redirect light – whether stationary objects, or moving objects such as vehicles, pedestrians and bicyclists. The sensors are so sensitive they can sense the difference between a paper bag and a small animal at nearly a football field away.

    Working together
    Developing the necessary infrastructure to support a sustainable transportation ecosystem will require the collaboration of many partners across multiple industries. State Farm and the University of Michigan's robotics and automation research team are critical to creating the visionary research project.

    Ford's work with others on the future of mobility is longstanding. Ford was an active participant in the Defense Advanced Research Projects Agency (DARPA)-controlled autonomous vehicle challenges in 2004, 2005 and 2007, the year Ford extended its efforts to include the University of Michigan.

    While Ford is responsible for developing unique components allowing for the vehicle to function at high levels of automation, the University of Michigan – under the direction of faculty members Ryan Eustice and Edwin Olson – is leading in development of sensor-based technologies. The sensors aid in the logic and virtual decision making necessary to help the vehicle understand its physical surroundings on the road.

    The university's researchers are processing the trillions of bytes of data collected by the vehicle's sensors, from which they can build a 3D model of the environment around the vehicle. The goal is to help the vehicle – and the driver – make appropriate and safe driving decisions.

    "This research builds on the University of Michigan's long history of pioneering automotive research with Ford," said Alec Gallimore, associate dean of research and graduate education at the school's College of Engineering. "The unique collaboration will enable Ford to benefit from the university's deep knowledge of robotics and automation, and it will allow University of Michigan faculty and students to work side-by-side with some of the best auto engineers in the world."

    Meanwhile, State Farm has been working with Ford to assess the impact of driver-assist technologies to determine if the technologies can lower the rate of rear collisions.

    Last year there were nearly 34,000 fatalities due to traffic accidents in the United States. By developing more intelligent vehicles, Ford helps create smarter drivers.

    "By teaming up with Ford and the University of Michigan in this research, we are continuing our decades-long commitment to making vehicles, roadways and drivers safer," said State Farm Chairman and CEO Edward Rust. "The changes new technologies bring to our lives are exciting, and we are always looking at how technology can better meet the ever-changing needs of our customers."

    Setting the stage for mobility in Michigan
    Today's Ford Fusion Hybrid research vehicle announcement follows an aggressive plan released this week by Business Leaders for Michigan to position the state as the global center for mobility and grow up to 100,000 new jobs in its auto sector by becoming a hub for excellence in advanced powertrain, lightweight and smart/connected transportation technologies.

    With Bill Ford as champion of Business Leaders for Michigan's mobility initiative, the plan has been developed with a coalition of top industry experts, the Center for Automotive Research and McKinsey & Company. The plan identifies growth strategies for the auto sector as it transitions to an increasingly advanced technology-based sector.

    Posted on

    Zoox Reveal Autonomous Bi-directional Electric Vehicle Concept

    Meet The Boz; it's not really a car - it's what might come after the car - a vehicle design based entirely around autonomous driving.

    Inside the Boz, the experience would be like sitting in a train. Drivers become passengers, or "commanders." Without needing to focus on traffic and road signs, they would be able to use the commute to do some work or watch a video or have a snooze!

    Just as the internal combustion engine enabled the car to replace the carriage, Zoox believe autonomous technology will replace the car, and in doing so create a new class of mobility known as 'Level 4'.

    Level 4 is a term taken from a policy statement the US National Highway Traffic Safety Administration released on May 30, 2013. This document outlines a spectrum of mobility systems from the fully manual Level 0, through to Level 4 which is fully autonomous.

    From a design perspective, the first element you may notice is what's absent: the front and rear windshield. This is not to say L4s can't have them — certainly those designed for tourism would — but this vehicle makes the statement that you now have an option.

    Firstly, it gains thermal, aerodynamic and acoustic efficiencies. The thermal load lost through the windshield is significant, requiring energy intensive climate control systems, as well as a number of ancillary systems to keep the glass clear. These inefficiencies are removed.

    The entry profile of the vehicle is aerodynamic as a near teardrop, unattainable in a car due to the requirement for driver vision. The low profile roofline and absence of glass further lends itself to superior acoustic insulation. The side windows are thin, but double glazed, which enhances these properties.

    Because the requirement for the passenger to be situationally aware of their exterior environment is removed, external sound and light can be shielded to enhance a sense of serenity and safety. This is a superior environment for interacting with voice-activated systems, watching video or conversing.

    You can be in the middle of a bustling city, but when the door seals, you are in your own world.

    The next point of observation may be that there is no hood. This is because there is no internal combustion engine — behind each wheel sits an electric in-wheel motor. The body language has been changed to reflect this setup, moving each wheel to its outer corner with minimal overhangs to maximize vehicle stability and interior volume.

    Finally, the L4 is symmetrical in its X and Y axes — there is no differentiation between back or front. In fact, each quadrant of the vehicle is mirrored and identical.

    Source: Zoox

    Posted on

    e-volo VC200 18 rotor 2 person electric helicopter – first flight [VIDEO]

    E-volo’s Volocopter is a revolution in aviation Made in Germany. Safer, simpler, and cleaner than normal helicopters, it has a unique way of moving – a groundbreaking innovation. The Volocopter is an environmentally friendly and emission-free private helicopter. Instead of one combustion engine, eighteen electrically driven rotors propel it.

    The maiden flight and first test flights were conducted in the dm-arena in Karlsruhe with the prototype of the 2-person VC200 on Sunday, November 17, 2013. Based on this model, it will be prepared for series production in the coming years. “There are already numerous requests for the Volocopter from around the world,“ said Alexander Zosel, managing director of e-volo.

    With multiple flights lasting several minutes reaching the nearly 22 m high ceiling of the dm-arena, including a number of smooth takeoffs and landings, the Volocopter concept exceeded all expectations. “Rich and incredibly quiet sound, absolutely no noticeable vibrations in the flight, convincing structure with a great, new spring strut landing gear, and an extremely calm rotor plane,“ concluded the e-volo managing director, thanking the KMK. “New innovations that have the possibility to change our world are continually presented at the Messe Karlsruhe. Therefore it was natural to work in partnership with the e-volo team to enable the test flights in the dm-arena,“ announced KMK managing director Britta Wirtz. “The fair is not just a display of strengths in the technology field, but concretely supports pioneers of aviation as well.“

    The developing team of e-volo knew from the onset that the Volocopter was very easy to fly. Due to elaborate simulations at the Stuttgart University, they already knew that it was much more quiet than a helicopter. However, the pleasant low, rich sound and the lower-than-expected noise level caused great cheering among the e-volo team during the first flights.

    People were eager to know whether there would be disturbing or even dangerous vibrations in the mechanic structure of the rotor plane. “Such vibrations are a large problem for normal helicopters,“ stated e-volo managing director Stephan Wolf, adding that “there, the vibrations together with the deafening noise have lead to much discomfort on passenger flights in helicopters.“ Due to the complex structure of the Volocopter in carbon lightweight design, it was not possible to simulate the expected vibrations in the laboratory. “The result of the first flight created a euphoria among the entire project team.“ Wolf and Zosel further stated that “not even the HD video cameras secured to the exterior carbon ring of the rotor plane captured the least vibrations.“

    Nearly all problems of normal helicopters are thereby solved.

    Posted on

    Yamaha Unveil Motive.e City Car @ Tokyo [VIDEO]

    In the current era of urban traffic and environmental problems there is increasing demand for downsizing and fuel efficient cars. MOTIV.e satisfies these demands by utilising ground breaking manufacturing and materials technology while delivering a new level of driver experience which emanates from the Yamaha Motor Company DNA.

    The MOTIV.e is created from Yamaha Motor's multi-wheel history and experience (2 wheel - 3 wheel and 4 wheel technology). Yamaha Motor Company has always been dedicated to craftsmanship with a focus on 'quality mobility'. The MOTIV.e builds on this philosophy and incorporates Formula One heritage, inspiration from motorcycle design and the latest technology to deliver an exciting and high quality driving experience. The MOTIV.e delivers a new level of personal mobility.

    Yamaha Motor Company chose Gordon Murray Design to cooperate in the design and development of the MOTIV.e which utilises Gordon Murray Design's revolutionary iStream® manufacturing technology. Yamaha Motor Company and Gordon Murray Design are a perfect fit as a partnership with both company's Formula One and technology backgrounds.

    The iStream® manufacturing system which incorporates Formula One composite technology delivers new levels of lightweight, safety, vehicle dynamics and manufacturing flexibility alongside low environmental impact.

    The MOTIV.e design reflects Yamaha's rich heritage in high quality lifestyle products while introducing a technical and dynamic shape which is inspired by Yamaha Motor's Motorcycle products. The iStream® design is centred on a steel frame incorporating bonded composite monocoque panels to produce a lightweight, rigid safety cell. All independent suspension and low unsprung weight delivers new levels of ride and handling. The all-new electric powertrain has been designed using 'state of the art' materials and technology.

    The MOTIV.e represents a new starting point for urban mobility vehicles and sets new standards in the ultra compact 4 wheeler segment.

    Posted on

    Mitsubishi GC-PHEV plug-in concept SUV [VIDEO]

    The Mitsubishi Concept GC-PHEV blazes new trails with powerful driving performance thanks to its full-time 4WD Plug-in Hybrid EV System; excellent stability and road handling that S-AWC (Super All Wheel Control) provides; and information power that an innovative human interface and Connected Car technology together bring. Offering the latest environmental performance, this vehicle empowers you to drive freely on the Earth while enjoying safety and peace of mind. Experience the reliability and satisfaction of driving the Mitsubishi Concept GC-PHEV.

    EXTERIOR
    A dynamic front face with SUV personality. A futuristic form that looks sculpted from a single block and wraps the vehicle with the strength to drive on any road.

    INTERIOR
    When you open the easy-access doors with no center pillar, the spacious cabin and futuristic interface catch your eye. Enter a progressive informational space that stimulates your adventurous heart. The door to a new driving experience is now opening.

    CONNECTED "TACTICAL TABLE"
    A large interface with a touch screen, sweeping wide through the center, collects information that passengers bring, information from the internet, and data accumulated by the vehicle itself, allowing the creation of original maps and driving plans that occupants can share as they connect with the world. The Connected Car possibilities expand from here.

    AR WINDSHIELD
    Vital driving information is displayed on the windshield to enhance navigation and warn of car distances and lane departures. A driving assist system that uses communication technology also enhances driving safety by notifying the driver with guidance and a warning when vehicles or pedestrians enter blind spots in intersections. AR：Augmented Reality

    NEW PHEV SYSTEM
    The FR-type Plug-in Hybrid EV system effectively employs engine and motor power. The 3.0-liter V6 supercharged MIVEC engine is assisted by a 70kW high output motor that provides dynamic performance. This system realizes low energy consumption while achieving CO2 emissions under 100 g/km and supremely quiet operation. SPECIFICATION : CONCEPT GC-PHEV

    ■Overall length / Overall width / Overall height (mm): 4930 / 1940 / 1980
    ■Seating capacity: 4
    ■Targeted hybrid fuel consumption: 15 km/L or more
    ■Targeted EV cruising distance: 40 km or more
    ■Engine type: 3.0-liter V6 supercharged MIVEC engine / Max. output: 250 kW
    ■Motor: Max. output: 70 kW
    ■Total battery electric power: 12 kWh
    ■Wheel drive: Full-time 4WD
    ■Transmission: 8-speed automatic

    Posted on

    Nissan BladeGlider Wheel Motor Powered EV Concept [VIDEO]

    More than a concept, Nissan BladeGlider is both a proposal for the future direction of Nissan electric vehicle (EV) development and an exploratory prototype of an upcoming production vehicle from the world's leading EV manufacturer. BladeGlider was developed with form following function. Nissan crafted the vehicle's unique architecture to give the driver and passengers "sustainable exhilaration" - a fresh electric vehicle driving experience based on peerless technology and exotic styling.

    Targeting the visionary individual seeking visceral driving and sustainability, BladeGlider goes beyond sheer power and acceleration to send the heart soaring into new realms of smooth "gliding" pleasure. It is a physical demonstration of the innovation and excitement of the Nissan brand and Nissan's Zero Emissions Mobility leadership. BladeGlider's pioneering spirit distinguishes it from anything yet envisioned for EVs and destines it to rule the roads of the not-so-distant future.

    Re-inventing the Performance Car - A Game Changer Designed from Scratch

    A clean slate was the starting point for this project, led by Francois Bancon, division general manager of Product Strategy and Product Planning at Nissan. "The goal was to revolutionise the architecture of the vehicle to provoke new emotions, provide new value and make visible for consumers how Zero Emissions can help redefine our conception of vehicle basics," said Bancon.

    BladeGlider's shape alone, with its narrow front track, challenges the orthodoxy that has dominated the roads since the earliest days of the internal combustion engine. The revolutionary nature of the car is more than skin deep. New possibilities for the designers and engineers were opened up by the unique characteristics of electric vehicles.

    BladeGlider has its conceptual roots in two aerial images: the soaring, silent, panoramic freedom of a glider and the triangular shape of a high performance "swept wing" aircraft.

    It is therefore fitting that, in terms of engineering, BladeGlider's developmental focus was aerodynamics: achieving low drag (cdA) while generating road-hugging downforce.

    Disruptive and challenging to the status quo, BladeGlider shares sustainable engineering values with both Nissan LEAF - the best-selling EV in history ─and the Nissan ZEOD RC (Zero Emission On Demand Racing Car), which will make its debut at next year's Le Mans 24 Hour race.

    A Provocative Shift in the Engineering Paradigm

    With its narrow, 1.0 metre lightweight front track and wide, stable rear track, BladeGlider looks as if it could have sprung from a "skunk works" project. But the radical architecture all boils down to aerodynamics and balance. Having the front wheels close together reduces drag and enhances manoeuvrability for high-G cornering power, assisted by its 30/70 front/rear weight distribution ratio. Aerodynamic downforce is created by the highly rigid yet lightweight carbon-fibre underbody, hence the lack of drag-inducing wings.

    When BladeGlider matures into a production car, it could be Nissan's first use of in-wheel motors. The in-wheel motors provide rear-wheel propulsion with independent motor management, while also contributing to freedom of upper body design and space-efficient packaging.

    To power the electric motors, BladeGlider employs Nissan's innovative lithium-ion battery technology, proven in Nissan LEAF. Battery modules are mounted low and towards the rear to enhance stability and handling.

    Revolutionary Breakthrough in High-Performance Design

    BladeGlider embodies a fearless vision of the EV future. Its tightly streamlined deltoid body comprises a tough and structurally optimised chassis wrapped in ultra-lightweight, yet strong and stiff, carbon fibre reinforced plastic (CFRP) finished in a pearlescent white colour that evokes the pristine freedom of a glider. The racing-inspired exterior features a sculpted contour that is both functional and breathtakingly beautiful. Starting from the low, flat and narrow nose, the body line rises gracefully to the cockpit canopy and then curves forcefully back over the large rear wheels, evoking a sense of dynamic movement even when the vehicle is standing still.

    "BladeGlider was conceived around delivering a glider-like exhilaration that echoes its lightweight, downsized hyper-efficient aerodynamic form," said Shiro Nakamura, Nissan's senior vice president and chief creative officer. "This design is more than revolutionary; it's transformational, applying our most advanced electric drive-train technology and racetrack-inspired styling in the service of a new dimension of shared driving pleasure."

    Inside the canopy, the cockpit seats three in a triangular configuration with the driver centre-forward. Seating appointments feature special light and comfortable coverings with yellow fluorescent lines. Amid simple yet edgy interior styling cues, an aircraft-type steering wheel and state-of-the-art instrumentation technology complete the glider-like image. To support maximum EV cruising efficiency, the IT system can display relief maps and atmospheric conditions.

    This efficient, aerodynamic, simple, and lightweight vehicle provides a "gliding" feel that combines the feeling of gravity-defying freedom and near-360 degree view of a glider with the pulse-quickening exhilaration of a race car.

    "I think that the excitement of the racing car should be mirrored in the excitement of driving the road car," said Ben Bowlby, director of Nissan Motorsport Innovation, who has supported the BladeGlider's development. "I think there are elements we can bring from the race track to make these future road cars more exciting, more fulfilling and give greater driving pleasure."

    As a rear-drive performance car, BladeGlider exhibits a coherent and linear handling that enables it to consistently hug road curves, providing feedback for intuitive and exhilarating steering control when cornering under threshold conditions.

    Augmenting BladeGlider's aerodynamically-engineered precise feedback and control, the canopy-like visibility of the driving position engenders a synchronised feeling of oneness with the machine and the road. The result is a free soaring experience which the driver can share with two passengers in the V-shaped seating configuration. Passengers sit at the longitudinal centre of gravity to maintain the car's balance at all times. The centre-driving setting of the cabin space is designed to enhance the driver's sensatory experience.　

    As a final touch, the driver's seat automatically slides laterally when you open the door, enabling easy access to passenger seats.

    New EV Values for the Next Generation

    By thinking outside the box, Nissan has created an EV that truly symbolises the unlimited potential of electric propulsion - balancing zero emissions with innovative excitement like never before.

    Posted on

    Mitsubishi Electric to Exhibit EMIRAI 2 EV concept car @ Tokyo Motor Show [VIDEO]

    Mitsubishi Electric will display its EMIRAI 2 concept car at this year’s Tokyo Motor Show. The car is a continuation of the original EMIRAI first exhibited in December 2011 with rear projection customizable dashboard display, biometrics capabilities, and sensor array.

    Advanced automotive technologies and products will be displayed in two EMIRAI 2 electric-vehicle concept cars. One vehicle features an EV powertrain and the other a driving-assistance system to offer safer and more comfortable driving experiences in the coming future.

    The EV powertrain system incorporates high-accuracy traction control and acceleration control. The driving-assistance system features integrated image sensing and powered on-board display technologies.

    The show will be held at the Tokyo Big Sight exhibition complex in Tokyo, Japan from November 23 to December 1.