Bosch choose Tesla Model S for autonomous drive testing [VIDEO]

As we reported a month ago, Bosch has confirmed they are working with Tesla to develop automated driving systems for production vehicles.

Spotting a test vehicle, equipped as they are with measurement devices, sensors, and instruments, is usually pretty easy. But that’s not the case for the new Model S Teslas that recently joined the Bosch fleet. Both these test vehicles are helping engineers further refine automated driving. But at first glance, it’s hard to tell them apart from production models. “Bosch is developing automated driving for production vehicles of all kinds,” says Dr. Dirk Hoheisel, member of the Bosch board of management. The new test vehicles are evidence of the progress Bosch has already made in integrating the necessary systems and components. Those attending the 62nd International Automotive Press Briefing can see this for themselves in Boxberg, Germany, from May 19 to 21, 2015

Fit for highly automated driving after 1,400 hours of work

To make the test vehicles ready for automated driving, they first had to be retrofitted. Fifty new Bosch components were installed in each car. They included a stereo video camera (SVC), which the car uses to recognize lanes, traffic signs, and clear spaces. The Bosch SVC is the smallest stereo camera system for automotive applications currently available in the market. Its compact design makes it easy to integrate into vehicles. In addition to the camera, 1,300 meters of cable were laid in each car and fixed in place with 400 cable ties. “After some 1,400 hours of work on each of them, the test vehicles are ready for highly automated driving,” Hoheisel says. Thanks to Bosch technology, the two Teslas can now autonomously drive from on-ramp to off-ramp without the driver needing to constantly monitor them.

This transfer of responsibility from the driver to the vehicle explains why so much time and effort is necessary for the retrofit. Highly automated vehicles must be capable of operating safely even if a component fails. The only way to achieve such operational reliability is by a design strategy that includes redundancy in safety-critical systems such as braking and steering. For example, both test vehicles feature both the iBooster electromechanical brake booster and the ESP braking control system. These Bosch components can brake the car independently of each other, without any need for driver intervention. “For Bosch, the principle here is safety first,” Hoheisel says. Back-up systems are also available for the two test vehicles’ power supply and vital ECUs.

Several thousand test kilometers driven without a hitch

Since 2011, Bosch has had two teams – on two continents – working on automated driving. At the Abstatt location in Germany, Bosch engineers are working on system integration. Their colleagues at Palo Alto in California’s Silicon Valley are driving forward work on function development. The two teams receive support from roughly 2,000 driver-assistance engineers who work for Bosch around the world. To make it as easy as possible for the two teams to share their results, Bosch uses identical test vehicles. Hoheisel explains why Bosch opted for two all-electric Model S vehicles made by the U.S. automaker Tesla: “They combine two automotive industry trends: electrification and automation.” This presents a particular challenge, he says, but one that Bosch relishes.

Bosch started testing automated driving on public roads at the beginning of 2013. So far, it has been using test vehicles based on the BMW 325d Touring. Engineers have successfully driven them for several thousand kilometers on freeways – both the A81 near Stuttgart and the I280 in California. Before the first test drives, the German certification authority TÜV Süd reviewed the safety concept that Bosch had prepared specially for the purpose. And even though the technology on board the vehicles is designed to handle any situation in freeway traffic, the drivers at the wheel have been specially trained. Bosch’s test drivers not only know the safety precautions inside out, but have also completed a multi-day training course.

Hitachi Delivers High Output Prismatic Li-ion Battery Cell

Hitachi Automotive Systems today announced that the company will be supplying 5,000W/kg high output power density prismatic lithium-ion battery cells for the new model Chevrolet Malibu Hybrid to be sold by General Motors (GM) in 2016.

These prismatic lithium-ion battery cells being delivered for the 2016 new model Chevrolet Malibu Hybrid employ heat resistant separators to ensure the ionic conductivity between the positive and negative electrodes, achieving not only a high output power density of 5,000W/kg, but also a high level of safety. In addition to this, the battery's ability to maintain its high output power density in GM evaluations, even under extremely low temperatures such as the minus 30℃ cold region test, led to its adoption.

Hitachi's lithium-ion battery operations for vehicles began in 1999, leading the charge worldwide and beginning mass production of safe, high-performance, long lasting products. To date, a total of over 5 million lithium-ion batteries have been introduced into the market for commercial hybrid buses and trucks, as well as hybrid passenger cars.

The many years of supply performance for lithium-ion batteries as mass produced products, together with the accumulated production and quality management know-how garnered from feedback from the market, has led to an emphasis on high reliability and earned Hitachi a high reputation from car manufacturers both inside and outside of Japan.

In addition, last year Hitachi Automotive Systems integrated the lithium-ion battery manufacturer Hitachi Vehicle Energy's design and R&D departments, advancing lithium-ion batteries by using the electronic, control, and software technology the company possessed toward battery control system development.

Hitachi Automotive Systems will continue to contribute to the evolution of electrically driven vehicles through the strengthening of electric power train products, lithium-ion batteries, and more.

Prismatic lithium-ion battery cell
ItemSpecification
Size (mm)120×80×12
Weight (kg)0.24
Average Voltage (V)3.7
Capacity (Ah)5.2
Output Density (W/kg)5,000
Energy Density (Wh/kg)80

Williams Demo World’s First Sodium-ion Powered Vehicle

Williams Advanced Engineering yesterday played host to a media event that saw the first public demonstration of a sodium-ion powered vehicle. Developed by British battery start-up firm Faradion in collaboration with Williams Advanced Engineering and Oxford University, this technology was demonstrated in an e-bike application as a proof-of-concept to showcase the capabilities of this new type of battery chemistry.

The project to demonstrate sodium-ion battery technology has been part-funded by Innovate UK, the UK’s innovation agency in its latest competition for ‘disruptive technologies in low carbon vehicles’. Although lithium-ion batteries are currently the predominant technology in electric and hybrid vehicles, as well as energy storage applications, sodium-ion has the potential to offer cost, safety and sourcing benefits. The base materials required for sodium-ion batteries are more easily sourced than those needed for lithium-ion batteries, which are only found in a limited number of markets around the world. Sodium salts used in sodium-ion batteries can be made from common salt, which is more abundant than lithium salt, and also available within the UK, providing possibilities for a British battery supply chain.

As a proof-of-concept, the cells for the e-bike have been manufactured to be larger than necessary, which helps to avoid unnecessary costs and lengthy manufacturing processes at this early stage. When optimised, the cells will be comparable in size to lithium-ion battery packs already on the market. As such, there is potential to exploit the technology for use in a wide range of electric and hybrid vehicles, as well as energy storage applications.

The e-bike battery pack is made up of four 12-cell modules that were designed and manufactured by Williams Advanced Engineering and controlled by a Williams designed battery management system. Williams is a proven leader in the design and manufacture of battery energy storage technology, having developed batteries for the Formula E electric racing series, Jaguar C-X75 hybrid supercar, and the Kinetic Energy Recovery Systems (KERS) that helped power the company’s Formula One racing cars from 2011-2013. Oxford University’s expertise has been used to maximise battery life and it is expected that as well as comparable performance, sodium-ion cells can offer a comparable lifetime to lithium-ion products.

Paul McNamara, Technical Director of Williams Advanced Engineering, said; “Williams Advanced Engineering has a history of innovation in lithium-ion battery technology for a range of different applications and whilst lithium-ion is still the dominant choice of chemistry, sodium-ion is a fascinating alternative that could have real benefits in terms of cost and availability. We have worked closely with Faradion and Oxford University to explore its potential and today was about showcasing the concept in a real world application for the first time.”

More: Faradion

2016 BYD e6 to get 82 kWh battery and 400 km Range

The 2016 BYD e6 will have 400 km (250 miles) range thanks to an increase in battery capacity to 82 kWh, according to a document from China’s Ministry of Industry and Information Technology.

Compared with the current model, the 2016 e6 will be 40 kg heavier from 2380 kg to 2420 kg with range increased by 100 km from 300 km to 400 km.

The 82 kWh battery pack, up from 60 kWh in the current model, is 100kg heavier (700 kg) with a claimed cell energy density of approx 150 Wh per kilogram.

The e6 was originally launched five years ago in May 2010. The first batch of 60 e6s were delivered to a taxi company in Shenzhen. Deliveries to individual buyers started in 2011 with annual sales of 1,544 in 2013 and 3,560 in 2014.

The 2016 e6 will be launched in late 2015. Prices will remain unchanged between 300,000 Yuan and 370,000 Yuan before rebates.

Researchers develop 20% improved lithium-sulfur battery for electric cars using vitamin C

Korean researchers have developed a new type of lithium–sulfur battery using vitamin C with a 20% improvement in performance over current ones.

A group of researchers led by Professor Lee Jae-young at the Gwangju Institute of Science and Technology said on Thursday that they succeeded in improving the energy capacity of lithium–sulfur batteries with vitamin C treated dual-layered graphene–sulfur.

Lithium-sulfur batteries are widely considered as a viable replacement for current lithium-ion batteries for electric cars because of its superior energy density. Yet, lithium-sulfur batteries have not been actively used in the field yet since there are a few problems to be resolved such as poor cycle performance and low charge/discharge rates.

However, the researchers showed that their vitamin C treated dual-layered cathode, which is composed of a sulfur active layer and a polysulfide absorption layer, can increase sulfur utilization dramatically resulting in a lithium-sulfur battery with a high specific capacity of over 600 mAh gsulfur (-1) after 100 cycles even under a high current rate of 1C.

Professor Lee said, “This development is meaningful in a sense that it can greatly improve low cycle performance of lithium-sulfur batteries, which is a big obstacle to commercialization of them,” adding, “we expect the new development will practically increase the adaptation of lithium-sulfur batteries to next-generation electric car batteries.”

The results of the development were published in the online version of ChemSusChem on April 29 with the title of “Improvement of energy capacity via Vitamin C-treated dual-layered graphene-sulfur cathodes in lithium sulfur battery”.

BMW and SCHERM Group launch 40-ton electric truck pilot project

The BMW Group is partnering with logistics company SCHERM Group to deploy a 40-ton pure-electric truck in the city this summer and become the first automobile manufacturer in Germany to use an electric truck of this size to transport materials on public roads.

The innovative traction vehicle, which is licensed for use on public roads, will be deployed as of this summer for just-in-time material transport over short distances. The electric truck will drive between the logistics company SCHERM Group and the BMW Group Plant Munich eight times a day, covering a distance of almost two kilometres one-way. Thanks to its alternative drive train, the truck is quiet, CO2-free in traffic and generates virtually no particle pollution for the environment. This is also reflected in the vehicle’s overall assessment in comparison with a truck with diesel engine: The environmentally friendly truck will generate 11.8 tons less CO2 per year – equivalent to a BMW 320d Efficient Dynamics driving almost three times around the world.

“Just under two years ago, our BMW i brand put sustainable mobility on the road. This pure electric truck signals that we are constantly working on innovative solutions and tackling logistics challenges,” says Hermann Bohrer, director of BMW Group Plant Munich. “We are therefore delighted with the cooperation with SCHERM.”

The BMW Group and SCHERM Group are investing a six-figure amount in the pilot project, which will initially span one year. If the vehicle proves itself in everyday driving conditions, both partners will seek to expand the project.

“After a long search, we have found an electro-mobility solution for the transport sector,” explains Rainer Zoellner, “e-truck” project manager at SCHERM Group. “We are certain to gain valuable experience with the BMW Group from this pilot project.”

The BMW Group pursues a holistic approach focused on implementing sustainability throughout the value chain. In addition to future-oriented mobility solutions, issues such as corporate environmental protection, efficient use of resources and reduction of CO2 emissions are firmly rooted in company strategy. Since 2014, the BMW Group has sourced more than half its global electricity needs from renewables.

SCHERM Group is an international systems provider offering solutions for the logistics, transport, real estate and service sectors. As a provider of services for the entire value chain, the company employs a workforce of around 2,000 employees at 14 locations and on a mobile basis in around 500 company-owned trucks. Sustainability is an important factor the company has defined as a fundamental value.

Volkswagen premiere the Golf GTE Sport: Plug-in hybrid sports car

VW presented the Golf GTE Sport in a world premiere at the legendary GTI event at Lake Wörthersee on 14 May 2015, Volkswagen is catapulting the GT tradition into the future. The high-tech Golf that is largely made of carbon is powered by a total of three motors – combined in a plug-in hybrid drive with system power of 295 kW / 400 PS. The concept car breaks down traditional barriers between road and motorsport vehicles. Its progressive hybrid system in combination with the high-tech all-wheel drive, a lightweight body, optimum aerodynamic downforce, precision running gear based on the design of the current Golf GTE, a new motor racing cockpit (including visualisation of the racing line) and an unusual seating concept (two monocoque-like interior areas) enable breathtaking performance on the racetrack. At the press of a button, however, the concept car is able to cover a distance of up to 50 kilometres on electric power alone and hence with zero emissions.

Drive system from motorsport and research

World Rally Car TSI engine. The 1.6 litre TSI (turbocharged direct-injection engine) adapted from the superb Polo R WRC (World Rally Car) is accommodated in the engine compartment at the front of the car. It delivers 220 kW / 299 PS and maximum torque of 400 Nm. Volkswagen has already won the World Rally Championship twice with this engine. In the Golf GTE Sport the four-cylinder masterpiece is assisted by two electric motors. The engineers positioned the first electric motor at the front (in the housing of the 6-speed dual-clutch gearbox). It develops 85 kW / 115 PS and maximum torque of 330 Nm. The second electric motor is located at the rear with the same power output but torque of 270 Nm. The total torque of the drive system is 670 Nm. Whenever possible, the concept car is powered solely by electricity without producing any emissions. In sporty "GTE mode" all three motors work together, giving the all-wheel-drive Golf GTE Sport a standstill to 100 km/h time of 4.3 seconds and a top speed of 280 km/h. In the NEDC cycle for plug-in hybrid vehicles the sports car consumes just 2.0 l/100 km/h.

Pure-bred sports car.

Balanced for the Nürburgring north loop. The concept of the Golf GTE Sport has been designed so that the car is at home in both normal road traffic and racetrack conditions. Accordingly, the drive, suspension, body and interior all follow the principle of a pure-bred sports car. The drive system offers maximum agility, the suspension displays maximum neutrality in interaction with the all-wheel drive, the carbon body is lightweight and with its balanced aerodynamics it virtually adheres to the road. The driver ergonomics bridge the gap to motor racing, and with optimum weight distribution and a low centre of gravity the overall package ensures that a lap around racetracks such as the north loop of the Nürburgring is a unique driving experience.

Interior rings in a new sports car era

Two-seater race car. The driver and passenger board the two-seater interior of the Golf GTE Sport through doors that swing right up in the style of the XL 1. The doors extend a long way up into the roof and down into the side sills, resulting in convenient boarding when they are opened upwards. The interior in carbon and microfibre consists of two completely separate areas for the driver and passenger. Like in motorsport vehicles, they sit quite a long way to the back on racing bucket seats with five-point belts. Accordingly, the steering column that is entirely clad in carbon projects a long way into the interior where it appears to float – a further characteristic feature of a rally car or touring-car racer. The functional elements are operated via controllers and buttons in the cocoon-like interior trim. The gearbox of the Golf GTE Sport can also be operated manually with shift paddles on the motorsport steering wheel.

Instruments on three levels. The instruments featuring a completely new design have been specially coordinated for the configuration of the driver's workspace. The Volkswagen interface designers opted for three transparent displays arranged behind one another on which all relevant information is displayed. On the smallest display at the front (closest to the driver) information such as the selected gear and the recuperation status is displayed; information that is only sporadically checked from the corner of the eye whilst driving. The centre display has secondary yet more complex information such as the power currently delivered by the drive (power meter) and the boost intensity of the plug-in system (electric boost). Information such as the current speed and the range are constantly in the driver's field of vision on the third and largest display. In addition, in "GTE mode" not only is the current lap displayed (e.g. 9 of 16), but there is also a virtual indicator of the ideal driving line – valuable assistance for safe and fast driving on complex racetracks such as the aforementioned Nürburgring north loop.

Ergonomic perfection. The clearly arranged multifunction switch for starting and stopping the hybrid drive and controlling the 6-speed DSG is ideally positioned to the right of the driver for easy access. Right next to it there is a control panel for further vehicle functions; these include a button for activating a fire extinguishing system similar to that used in motorsport. Furthermore, the passenger is also supplied with data via a display in his interior segment. In "Info Mode" the current speed, the gear currently engaged and the engine speed can be displayed. If the passenger switches to "Data Mode" he can call up the vehicle acceleration and lateral force figures (g- forces). It is not only the use of carbon, but rather a general lightweight design that saves weight in the interior. For example, the loops for opening the doors are made of the same synthetic fibre as the five-point belts. Moreover, extremely elaborate ergonomics prevail in every detail. The operating mode switch for selecting "E- Mode", "GTE-Mode" or "Hybrid-Mode", for example, is situated in the roof, like in a jet plane.

Body design and concept

Extremely lightweight. The body of the Golf GTE Sport is largely made of lightweight carbon. As both a brand and a group, Volkswagen is a trailblazer in the industrial use of this material. For example, like the exterior of the Bugatti Veyron 16.4, the body of the Volkswagen XL1 is also made of carbon. The high-strength carbon body of the Golf GTE Sport therefore weighs much less than a comparable steel body.

Side profile. The design concept of the Golf GTE Sport manifests itself in the car's striking silhouette. Here, Volkswagen is continuing the idea of C-pillars with a two-level design originating from the 2007 Golf GTI W12-650, which has been constantly further perfected in various concept cars. On the Golf GTE Sport that is now being presented, this C-pillar concept, which is unique worldwide, has reached a degree of perfection that allows it to leave the show car stage and – as a design vision – bridge the gap to the Golf GT models of the future. The basic styling of these pillars (like the string of a bow taut with an arrow) follows the unmistakable Golf design, but at the same time feature some completely new C-pillar details: behind the level visible from outside a second one opens up. The airstream flows between these two levels and is contributing to the aerodynamic downforce and to the cooling of the rear brake system. Stylistically, this concept means that the rear section (like the front section) is extremely wide. By contrast, the passenger cell between the A-pillar and the interior part of the C-pillar becomes narrower when viewed from the front to the rear – an avant-garde interplay of extremely powerful shapes.

Doors and sills fold upwards. As described, the concept car painted in pearlescent "White Club" has two gullwing doors that swing forwards. The upper part that extends a long way into the roof is entirely made of dark visible carbon. A large part of the side sill is integrated in the door cutout. The three-dimensional body of the sill is enhanced at the top in the door section with an area in dark visible carbon. Further features on the side profile in visible carbon are the door mirror caps, the door window frames and the lower sill area. This part of the sill is designed as a splitter, i.e. a thin and sharp aerodynamic element, a feature familiar in motorsport. The side sill is framed by the new 20-inch alloy wheels fitted with tyres in format 235 at the front and 275 at the rear.

Front. With the front section of the Golf GTE Sport the Volkswagen design team is impressively illustrating how the Golf GT models could develop in future. On the concept car, the designers removed the striking blue radiator grille line of the Golf GTE production model from the grille and positioned it below the bonnet as a blue crossbar running across the whole width of the front. Below it, three further crossbars in black chrome look extend across the centre air inlet. The high-gloss black air inlet grille itself has the honeycomb structure typical of GT models. A further air inlet below the crossbars is framed at the top and to the sides by a striking aerodynamic element (also made of carbon). A double spoiler, also designed as a splitter, rounds off the front. Here, too, carbon is used.

LED headlights and daytime running lights. All electric and plug- in hybrid models from Volkswagen have C-shaped LED daytime running lights as a distinctive feature, and the Golf GTE Sport is no exception. Here, they frame the whole radiator grille unit at the sides, and in the top area there is an almost seamless transition from the LED daytime running lights to the extremely narrow and sharp LED headlights.

Rear. Never before has Volkswagen realised such a charismatic and sporty rear for a Golf. Here, too, the two levels of the C-pillars are a defining stylistic feature giving the Golf GTE Sport a very wide and powerful appearance from the rear. The extended outer levels of the C-pillars at the rear – like the tail unit of an aeroplane – elongate the car together with the large roof spoiler. Typically Golf: the striking tailgate with a vertical downward angle at the level of the redesigned LED rear lights. At the top, the tailgate is limited by a black carbon roof spoiler – a wing that seems to hover in front of the tailgate at a distance of a few millimetres to the roof. The C-pillars that taper at an angle to the rear and the bumper merge into one another, with the latter projecting far above the line of the tailgate. As an imaginary continuation of the side strip made of visible carbon (above the sill), the top edge of the bumper also features visible carbon. Below this is an area painted in the body colour (with air outlets on the outside). The last level is a large diffuser made of visible carbon with the splitter that is also continued here. The round stainless steel trims of the twin-pipe exhaust system are integrated in the middle of the diffuser.

Drive – plug-in hybrid and electric propshaft

E-Mode – setting off on electric power. No Golf has ever had three motors before. But this one does. As described at the beginning, the combustion engine fitted by Volkswagen is a turbocharged 1.6-litre four-cylinder direct-injection engine (TSI) that produces 220 kW / 299 PS of power and a maximum torque of 400 Nm. The electric components consist of the lithium-ion battery and two electric motors. The front electric motor is integrated in the housing of the 6- speed DSG (DQ400E). Both electric motors have a power output of 85 kW. The total available system power is 295 kW / 400 PS. If necessary, the system drive power can be distributed to all four wheels thanks to the rear electric motor and an "electric propshaft". In normal operation the Golf GTE Sport drives just as quietly as the production Golf GTE that is already marketed. In "E-Mode" it is setting off purely electrically. In this case the concept car uses the battery that can be charged externally (but also whilst driving) to cruise without producing any emissions. It can cover up to 50 kilometres on a battery charge. When a defined minimum battery charge is reached, the 1.6 TSI is automatically switched on and the Golf GTE Sport drives in "Hybrid" mode. As soon as the battery reaches a certain charge level again, "E-Mode" can be reactivated at any time via a switch in the overhead console. In "E-Mode", the rear axle electric motor is first and foremost responsible for propulsion. When high demands are made on performance, the front electric motor is also activated to provide support.

Hybrid mode – silent coasting. As soon as the drive system or the driver deactivates "E-Mode", the Golf GTE Sport becomes a classic full hybrid with regenerative braking charging the battery and automatic utilisation of the right combination of TSI and/or electric motors according to the specific drive situation. When the driver releases the accelerator pedal, and the battery is sufficiently charged, all drive sources are shut off. This is referred to as "coasting". If the driver releases the accelerator pedal or brakes, and the battery is insufficiently charged, the two electric motors operate as generators and charge the lithium-ion battery with the energy recovered from braking. With the dual mode "Battery Hold" or "Battery Charge" the battery's energy content can be deliberately kept constant by the driver ("Hold") or increased ("Charge"). When the 1.6 TSI engine is the sole source of propulsion, the concept car is a pure front-wheel drive car.

GTE-Mode – the power of three hearts. The switch on board the Golf GTE Sport that is most important for dynamic performance is located in the overhead console. It bears the letters "GTE". When the driver operates this switch, the character of the Golf GTE Sport's drivetrain changes drastically in an instant because now the full system power of 400 PS is available. The turbocharged 299 PS petrol engine alone delivers immense propulsive power, and at this high level the electric drive components of the Golf GTE Sport assume an additional boost function. The boost effect is so strong that the drive unit would also perform well if used in professional touring car races: the Golf GTE Sport sprints to 50 km/h in 1.8 seconds, reaches 100 km/h in 4.3 seconds, and the maximum speed permitted in Austria, i.e. 130 km/h, in 6.5 seconds. On German motorways, the concept car reaches 200 km/h in 15.9 seconds. In "GTE-Mode" all four wheels of the Golf are driven.

All-wheel drive – "electric propshaft". In "GTE-Mode" and as soon as the situation necessitates it, the drive power of the Golf GTE Sport is distributed to both axles. In this case (and if battery charge is low), the front electric motor – which is now being supplied with kinetic energy via the TSI – acts solely as a generator and a source of electricity for its counterpart at the rear axle. Since the energy for driving the rear axle flows by wire and not mechanically here, this is referred to as an "electric propshaft". Because the TSI drives the rear electric motor via the front electric motor, the all-wheel drive system also operates when the battery's charge state is low – an invaluable advantage in terms of driving dynamics. The importance of the implementation of the "electric propshaft" for Volkswagen with regard to series production is demonstrated by the fact that the company has had the German equivalent of this designation protected under copyright law.

10x motor electric VTOL aircraft prototype takes off [VIDEO]

A team at NASA's Langley Research Center is developing a concept of a battery-powered plane that has 10 motors and can take off like a helicopter and fly efficiently like an aircraft.

The prototype, called Greased Lightning or GL-10, is currently in the design and testing phase. The initial thought was to develop a 20-foot wingspan (6.1 meters) aircraft powered by hybrid diesel/electric engines, but the team started with smaller versions for testing, built by rapid prototyping.

This research has helped lead to NASA Aeronautics Research Mission Directorate efforts to better understand the potential of electric propulsion across all types, sizes and missions for aviation.

More: PHYS.org